On-device repro showed the cover snapshot pinning ~52KB of contiguous
heap (cloning the full 48KB framebuffer with malloc overhead). MaxAlloc
on Home was 61KB; nothing was leaving headroom for HTTPS, which needs
30-50KB contiguous for the mbedTLS handshake.
Add region-aware framebuffer helpers to GfxRenderer that translate a
logical rect through rotateCoordinates and copy only the byte range that
contains the rotated rect. HomeActivity records the tile rect it passes
to drawRecentBookCover and caches only that subregion.
Measured on device (X3, Portrait):
Idle on Home | Free 102K -> 139K | MaxAlloc 61K -> 115K
Mid-EPUB-read | Free 81K -> 134K | MaxAlloc 70K -> 115K
Cover cache | ~52K -> ~16K (per allocation)
Works in all four orientations because the bounds helper samples the
four logical corners through the existing rotation, so the cached byte
range always covers the pixels the theme could have drawn into.
Savings will vary with theme, but should be significant across all.
The "logs only flow if you unplug and replug the USB cable at the right
moment" symptom traced to two interacting problems with the ESP32-C3 USB
Serial/JTAG controller (HWCDC):
1. Serial.begin was gated on gpio.isUsbConnected(). That check sampled
USB state at one specific microsecond during boot. If USB enumeration on
the host hadn't completed by that moment (common after a reset that
auto- reconnects a moment later), Serial was never initialized and
stayed dead until the next boot where the timing happened to win.
2. HWCDC writes block for up to the configured TX timeout (default 250
ms) when the host has the port open but isn't actively draining — a
state the macOS USB CDC stack enters intermittently after reconnect. The
firmware then appears to hang on logging until a USB unplug+replug
cycles the peripheral and flushes the TX FIFO.
Fix: move the Serial init to the very top of setup() with a 250 ms stall
before Serial.begin (lets the USB peripheral power-on and host
enumeration complete on cold boot), and call logSerial.setTxTimeoutMs(0)
so writes drop bytes harmlessly when the host is slow instead of
stalling the firmware. Both warm reboot and cold power-on now produce
logs immediately.
Did you use AI tools to help write this code? partial
## Summary
Add ability to long press 'confirm' on a book in the recent books list
to be prompted to remove it from the list.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? *Yes, Claude*
---------
PR #1908 silent-restarts on exit from any wifi-using activity to defuse
LWIP/mbedTLS heap fragmentation, but two of the wifi-using paths slipped
through that audit:
KOReaderAuthActivity (Settings -> KOReader sync -> Authenticate)
OtaUpdateActivity (Settings -> Check for update, back-out paths)
Both used WiFi.disconnect + WiFi.mode(WIFI_OFF) on exit and returned
control to Settings, leaving ~50KB of contiguous heap stranded for the
rest of the session.
Mirror the FontDownloadActivity pattern: if WiFi was activated,
disconnect and silentRestart. OTA's success path is unchanged:
SHUTTING_DOWN already calls plain ESP.restart() so the new firmware
boots normally; only the cancel/fail/no-update back-out paths now go
through silentRestart().
Did you use AI tools to help write this code? partial
## Summary
* **What is the goal of this PR?**
Fix EPUB optimization when XHTML image references are URL-encoded.
* **What changes are included?**
The optimizer already converts image files to `.jpg`, but XHTML files
could still reference the original URL-encoded image path, for example:
```html
<img src="images/wensday%201%20full%202.png">
````
The optimized EPUB then contained the converted file:
```text
images/wensday 1 full 2.jpg
```
but the XHTML still pointed to the old `.png`, so CrossPoint failed to
extract/render the image.
The issue was that the previous replacement logic matched only the plain
filename form, such as:
```text
wensday 1 full 2.png
```
but not the URL-encoded form:
```text
wensday%201%20full%202.png
```
This PR updates XHTML image `src` attributes through the existing
DOMParser pass by decoding and resolving the image path before matching
it against renamed images.
After this fix, the optimized EPUB correctly rewrites the XHTML image
reference to the generated `.jpg`, and the image renders correctly.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
---
Please let me know if you have questions,
Thank you!
## Summary
* **What is the goal of this PR?**
Fix incorrect power button long-press detection during shutdown/wake
verification by introducing dedicated power button timing logic.
* **What changes are included?**
* Added getPowerButtonHeldTime() to HalGPIO as a wrapper over input
manager logic
* Replaced generic getHeldTime() usage with power-button-specific timing
in verifyPowerButtonWakeup()
* Ensures shutdown/wake decision is based only on actual power button
hold duration, not any-button timing
* Minor header update for new API exposure in HalGPIO.h
## Additional Context
This fixes a bug where holding another button while briefly pressing the
power button could incorrectly trigger shutdown behavior due to shared
timing state (getHeldTime()).
The change isolates power button timing to prevent cross-button
interference and makes shutdown logic reliable during multi-button
interactions.
No behavioral changes are expected outside of power-button handling
logic.
**Dependencies**
- SDK PR: https://github.com/crosspoint-reader/community-sdk/pull/3
This PR requires the `community-sdk` submodule to be updated after the
SDK change is merged.
- Fixes: #1881
---
### AI Usage
Did you use AI tools to help write this code? _**PARTIALLY**_
## Summary
* **What is the goal of this PR?**
Improve the UI based on feedback from someone on discord
> Downloading ALL fonts feature.
> 1.1 Disable sleep when downloading, in my case went directly to sleep
just right after downloading.
> 1.2 It would be great to have and overall progress indicator as we
only have the indication of each font family
> 1.3 Any cancel or pause function might come in handy in case battery
is running out and then resume or retry with pending fonts
* **What changes are included?**
- Now the UI can show overall progress across every file being
downloaded in the batch, not just progress inside the current family.
- Extended `HttpDownloader::downloadToFile()` to accept a cancel flag
and abort the download.
- Rendered a cancel button in the font download UI while a download is
in progress.
- `preventAutoSleep()` in `FontDownloadActivity.h` now returns true for
`state_ == COMPLETE` and `state_ == ERROR` in addition to
`LOADING_MANIFEST` and `DOWNLOADING`
## Additional Context
Not very satisfied with how `HttpDownloader.cpp` is right now, might try
to refactor it after v1.3.0
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
WiFi/LWIP/netif teardown scatters long-lived allocations across the
heap, leaving ~50KB of contiguous space unrecoverable without a reboot.
Reboot the SoC on exit from any wifi-using activity to guarantee a clean
heap. An RTC_NOINIT flag survives the reboot and tells setup() to skip
the boot splash and route the user back where they came from:
- File transfer / Calibre / OPDS / Font download -> home
- KOReader sync -> currently-open EPUB
Activities check WiFi.getMode() before rebooting, so backing out of the
network mode menu without joining doesn't trigger a cycle. KOSync also
esp_wifi_stop()s after the sync result so the radio is off while the
user reads it; full teardown happens at the reboot.
## Additional Context
The silent reboot skips the booting splash screen - it visibly looks
like a screen refresh. This does cause a disconnection/reconnection blip
for developers actively pulling logs over serial, but `pio device
monitor` and the like successfully reconnect and feed in the early boot
serial.
as an example:
```
[256676] [DBG] [ACT] Exiting activity: KOReaderSync
[256706] [DBG] [MAIN] Silent restart (target=reader)
ESP-ROM:esp32c3-api1-20210207
Build:Feb 7 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xf (SPI_FAST_FLASH_BOOT)
Saved PC:0x403872bc
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fcd72a0,len:0x990
load:0x403cbf10,len:0xac8
load:0x403ce710,len:0x4d28
entry 0x403cbf10
[22] [INF] [MAIN] Hardware detect: X4
[29] [SD] SD card detected
[43] [DBG] [CPS] Settings loaded from file
[58] [DBG] [KRS] Loaded KOReader credentials for user: jeremydk
[69] [DBG] [OPS] Loaded 1 OPDS servers from file
[69] [DBG] [UI] Using Lyra theme
[70] [DBG] [MAIN] Starting CrossPoint version 1.2.0-dev-detached-bde75787
...
[203] [DBG] [ACT] Entering activity: Reader
[211] [DBG] [EBP] Loading ePub: /Halting State - Charles Stross.epub
[221] [DBG] [BMC] Loaded cache data: 51 spine, 41 TOC entries
[246] [DBG] [CSS] Loaded 41 rules from cache
[247] [DBG] [EBP] Loaded ePub: /Halting State - Charles Stross.epub
```
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _PARTIALLY_
## Summary
SD card font fixes:
- `TxtReaderActivity` needs to call `renderer.ensureSdCardFontReady` to
build the advance lookup table to support rendering with SD card fonts.
This revealed that `TxtReaderActivity` was inconsistently performing
layout with `getTextWidth`, when the renderer actually uses
`getTextAdvanceX`, which can lead to minor inconsistencies in alignment.
- Avoid allocating one big `allText` string in
`ParsedText::layoutAndExtractLines`. Instead, pass the vector of word
strings directly to `SdCardFont::buildAdvanceTable`, where the algorithm
just needs to iterate codepoints anyway.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
---------
Co-authored-by: Justin Mitchell <justin@jmitch.com>
## Summary
Deleted two unused header files containing binary icon data.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
First of several changes to decouple and clean up SD card fonts
integration. This change eliminates SdCardFontGlobals.h:
- Simply declare the `extern SdCardFontSystem sdFontSystem` in
SdCardFontSystem.h.
- `ActivityManager::goToReader` should not care about loading SD card
fonts. Instead do the same work in `ReaderActivity::onEnter`, after the
previous activity has exited and after ReaderActivity has validated the
file path.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
Relative includes can hide inappropriate dependency relationships. In
this case, I found that lib/KOReaderSync/KOReaderCredentialStore.cpp was
dependent on src/JsonSettingsIO.h -- a lib -> app dependency, the
opposite direction dependencies should flow in this project.
This change replaces all relative includes with root-relative includes,
and corrects the KOReaderCredentialStore dependency by moving its JSON
settings serialization local to the KOReaderSync library.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
## Summary
- Holding the navigation button in **Settings → Reader → Font family**
now advances the selection by a full visible page instead of one item at
a time.
- Same fix applied to **Settings → Language**, which had the same
one-item-only behavior.
- Mirrors the pattern already used in font download (ceb3fed) and
chapter selection screens.
## Test plan
- [ ] Settings → Reader → Font family: tap moves by one item; hold jumps
a page (wraps at ends)
- [ ] Settings → Language: tap moves by one item; hold jumps a page
(wraps at ends)
## Summary
* **What is the goal of this PR?**
Separate the font manager's combined `Download / Update All` action into
separate `Download All` and `Update All` rows
* **What changes are included?**
- Updated multiple i18n translation files to add `STR_UPDATE_ALL` and
adjust `STR_DOWNLOAD_ALL` text.
- Added separate handlers: `downloadAll()` for fonts that have been
installed and `updateAll()` for fonts with updates.
- `Download All` and `Update All` are only shown when applicable.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
## Summary
Bind `prev` / `next` functionality to the left and right buttons in BMP
Viewer and adds labels
<img width="718" height="953" alt="image"
src="https://github.com/user-attachments/assets/c6dac14e-14f5-4cbf-9298-772cfc479f33"
/>
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
Reverts crosspoint-reader/crosspoint-reader#1912
This was meant to be more robust with partial SD card fonts, but causes
trouble for folks using custom font sizes. We need a better approach to
decouple numeric font sizes from S/M/L/XL settings.
## Summary
* **What is the goal of this PR?**
1. Adds font family deletion support to the font download activity so
users can remove installed font families directly from the download
list.
2. Address an issue where a font family manually deleted in the file
browser by user will show as "update" in the `FontDownloadActivity`
* **What changes are included?**
* Updated button hint label to show `Delete` when deletion is available.
* Added confirmation before deleting a selected installed font family.
* Refreshed font registry in `fetchAndParseManifest` (for the second
goal above)
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
## Summary
This PR introduces **Focus Reading**, a generic implementation of
artificial fixation points (similar to Bionic Reading) designed to
improve reading speed and focus by bolding the initial characters of
words. This is achieved by dynamically bolding characters during
indexing.
<img width="500" alt="Focus Reading on X3"
src="https://github.com/user-attachments/assets/94a632a5-82da-47be-957c-538b35bf84d9"
/>
### Implementation Details
#### Core Text Engine (`ParsedText`)
- Modified `ParsedText::addWord` to implement a custom bolding
algorithm. It uses a 45% ratio for bolding, with a minimum of 1
character and a maximum of 9.
- UTF-8 Safety: Integrated `utf8NextCodepoint` to ensure character
counting and string slicing occur at safe byte boundaries, preventing
corruption of multi-byte characters (e.g., accented letters or smart
quotes).
- Intelligent Tokenization: This correctly identifies and separates
"word" characters (letters, apostrophes, hyphens) from "non-word"
characters (numbers, brackets, smart quotes).
- Formatting Preservation: The logic ensures that punctuation is not
"stolen" for the bolding count and that existing styles (like italics or
underlines) are preserved across the bold/regular split.
- Processing at indexing stage reduces CPU load at render-time and
ensures layout/fit is unaffected.
- Split details are tracked with `wordIsFocusSuffix`. After splitting
and layout, suffixes are merged back into their preceding word entries
to prevent a doubling of RAM usage.
#### Settings and UI
- Version Management: Bumped `SECTION_FILE_VERSION` to `21`
- Global Settings: Added `focusReadingEnabled` to `CrossPointSettings`.
- User Interface: Added a new toggle in the "Reader" section of the
settings menu, positioned after the "Embedded Style" option.
- Localization: Added the `STR_FOCUS_READING` string
#### Plumbing
- Plumbed the `focusReadingEnabled` boolean through
`EpubReaderActivity`, `Section`, and `ChapterHtmlSlimParser` to ensure
the user's setting reaches the `ParsedText` constructor during chapter
indexing.
## Additional Context
### Files Changed
- `lib/Epub/Epub/ParsedText.h / .cpp`: Core fixation logic and UTF-8
tokenization.
- `lib/Epub/Epub/Section.h / .cpp`: Cache header updates and
invalidation logic.
- `lib/Epub/Epub/parsers/ChapterHtmlSlimParser.h / .cpp`: Plumbing the
setting to text blocks.
- `src/CrossPointSettings.h`: Data persistence for the new setting.
- `src/SettingsList.h`: UI toggle implementation.
- `src/activities/reader/EpubReaderActivity.cpp`: Handling settings
changes during reading sessions.
- `lib/I18n/translations/*.yaml`: UI strings.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**YES**_
Add SdCardFontFamilyInfo::pickClosestSize(targetPtSize) and have the
manager and SdCardFontSystem drive size selection from a target point
size derived from the user's font-size enum (SMALL=12, MEDIUM=14,
LARGE=16, EXTRA_LARGE=18) rather than indexing the family's sorted size
list by enum ordinal.
The ordinal-slot approach mis-selects whenever a family doesn't ship the
canonical {12,14,16,18} set: a family with only [10,14,18] would map
SMALL/MEDIUM/LARGE/EXTRA_LARGE to 10/14/18/18 — fine for SMALL but
arbitrary for the rest. Closest-pt always picks the on-disk file nearest
to the user-intended point size, with a deterministic smaller-pt
tie-break.
No change for canonical-sized families.
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
* **What changes are included?**
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< YES | PARTIALLY | NO
>**_
## Summary
* **What is the goal of this PR?**
Add end-to-end integrity verification for downloaded font files by
including CRC32 checksums in the font manifest and validating downloaded
`.cpfont` files on device.
* **What changes are included?**
- `generate-font-manifest.py`: compute and include `crc32` for each
`.cpfont` asset in the generated `fonts.json` manifest.
- `FontDownloadActivity.h`: extend manifest file metadata with `crc32`
and declare checksum helper.
- `FontDownloadActivity.cpp`: parse `crc32` from manifest, compute CRC32
of downloaded files using `esp_rom_crc32_le`.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**YES**_
## Summary
Removes duplicate "Download Fonts" menu entry and adds complete
navigation support to the font download activity.
## Problem
"Download Fonts" was appearing in **both** Reader settings and System
settings, creating a confusing duplicate menu entry.
## Changes
### 1. Remove Duplicate Menu Entry
- Removed `STR_DOWNLOAD_FONTS` from `systemSettings` in
`SettingsActivity.cpp`
- "Download Fonts" now only appears in **Reader settings**, positioned
right after the font family setting
- Rationale: Font settings logically belong together in the Reader
category
### 2. Navigation Improvements
- **Single-item navigation**: Replaced manual bounds checking with
`ButtonNavigator::nextIndex()` and `previousIndex()` methods
- Navigation now wraps from last item to first (and vice versa)
- **Page navigation**: Added continuous navigation handlers
- Long-pressing up/down buttons now navigates by page
- Uses `UITheme::getNumberOfItemsPerPage()` for consistent behavior
## Files Changed
- `src/activities/settings/SettingsActivity.cpp`: Removed duplicate
entry
- `src/activities/settings/FontDownloadActivity.cpp`: Navigation
improvements
## Testing
- Build: ✅ Compiled successfully
- Device testing: Recommended before merge
## Summary
**Goal:** Fix bidirectional KOSync position matching between CrossPoint
and KOReader so that syncing in either direction lands on the correct
page with character-level accuracy.
**Changes included:**
**Download — `toCrossPoint` (server XPath → CrossPoint page)**
- **XPath ancestry mode for structured elements**: The previous
`ParagraphStreamer` only tracked `<p>` elements. Replaced with a full
ancestor-walking mode that correctly resolves XPaths pointing into
`<li>`, `<ul>`, and other structured elements. Char offset within the
target element is bounded to the matched element's content only.
- **Slash-in-attribute-value corrupts depth tracking**:
`processByteInTag()` treated every `/` byte as a self-closing tag
marker, including `/` inside quoted attribute values (e.g.
`xmlns="http://..."`, `src="Links/image.jpg"`). This drove `htmlDepth`
to 0 prematurely, causing the ancestry search to exit far short of the
target paragraph. Fixed with `inAttrQuote` tracking.
- **Off-by-one in page formula**: `intra * totalPages` rounds up
incorrectly for last-page positions. Changed to `intra * (totalPages -
1)` to map the `[0, 1]` intra fraction correctly onto the `[0,
totalPages-1]` page range. Example: page 14 of 17 was returned as 15.
**Upload — `toKOReader` (CrossPoint page → server XPath)**
- **Off-by-one in page-to-intra formula**: Symmetric fix — `pageNumber /
totalPages` changed to `pageNumber / (totalPages - 1)`, with the guard
updated from `> 0` to `> 1` to avoid division by zero.
- **`<li>`-based XPath generation**: When the current page starts on a
list item, `findXPathForProgress` now generates `ul[N]/li[M]` XPaths
rather than falling back to the preceding `<p>`. Requires the new
`listItemIndex` field in `PageLutEntry` (section cache version bumped to
23).
- **Text-node precision with correct `text()[N].M` format**: KOReader
expects `text()[N].M` where `N` is the 1-based index of the specific
text node within the element. The previous attempt generated `text().M`
(no brackets), which caused KOReader to jump to the front of the book.
Implements a per-element text-node index stack in
`XPathProgressResolver` — parallel to the existing element path stack —
that correctly tracks text node indices relative to each element. Empty
text nodes from bare anchor elements (`<a id="anchor"/>`) are
intentionally skipped, matching KOReader's own text node counting
behavior.
**Reviewer-caught bugs**
- **Double `onCloseTag()` on malformed `</br/>`**: Both the `tagIsClose`
path and the self-closing `/` check were firing, double-decrementing
`htmlDepth`. Fixed with a `!tagIsClose` guard.
- **Dangling pointer in `LOG_DBG`**:
`std::to_string(*nextParagraphPage).c_str()` passed a pointer to a
temporary destroyed before the variadic call. Fixed with `snprintf` into
a stack `char[8]` buffer.
## Additional Context
- Section cache version bumped from 22 → 23 due to the new
`listItemIndex` field in `PageLutEntry`. Users upgrading will see a
one-time re-render of all cached sections on first load — no data loss.
- The `textNodeIndexStack` in `XPathProgressResolver` is a
`std::vector<int>` that mirrors the existing `path` and `parentStates`
stacks — same depth, same lifetime. No additional heap pressure beyond
what was already present.
- All fixes verified on device with *Gentle and Lowly* by Dane C.
Ortlund (spine 21, 17 pages). Download syncs land on the correct page;
upload syncs land at the correct paragraph with character-level offset.
## Test plan
- [ ] Download: sync from KOReader → CrossPoint lands on correct page
for `text()[N].M` XPaths
- [ ] Download: ancestry correctly resolves `<li>` positions inbound
from KOReader
- [ ] Upload: sync from CrossPoint → KOReader lands within one page for
mid-paragraph positions
- [ ] Upload: sync from CrossPoint → KOReader correctly targets `<li>`
elements when page starts on a list item
- [ ] Upload: `text()[N].M` format XPaths do not cause KOReader to jump
to front of book
- [ ] Section cache version 23: delete `.crosspoint/` and verify clean
re-parse with no crashes
---
### AI Usage
Did you use AI tools to help write this code? **YES** — developed with
Claude Code (Anthropic).
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
## Summary
* **What is the goal of this PR?** Fix KOSync failing with "Network
error" on large/complex EPUBs, and simplify the sync navigation flow by
removing the callback/result pattern.
* **What changes are included?**
This PR combines the approaches from #1855 and #1760 into a single,
cleaner solution:
**Memory fix (from #1855):**
- `EpubReaderActivity` pre-computes the local KOReader position and
chapter name, then explicitly releases `epub` and `section` before
launching `KOReaderSyncActivity`. This frees ~65KB measured on device,
giving the TLS handshake sufficient heap. The root cause was
`MBEDTLS_ERR_X509_ALLOC_FAILED` (-0x2880) when a 3-cert chain consumed
~48KB during the handshake with only ~50KB available.
- `KOReaderSyncActivity` no longer receives a `shared_ptr<Epub>` at
construction — it lazy-loads the Epub after TLS only if remote progress
is found (`ensureEpubLoaded()`).
- Added `MIN_HEAP_FOR_TLS = 55000` guard in `KOReaderSyncClient` —
returns `LOW_MEMORY` early if aggregate free heap is too low before
attempting a TLS connection.
**Navigation simplification (from #1760):**
- Replaced `startActivityForResult` + callback with
`activityManager.replaceActivity` / `activityManager.goToReader`.
Progress is saved to `progress.bin` before the epub is released
(cancel/upload paths) and in `saveProgressAndReturn` (apply remote
path). The reader re-launches from the saved position naturally via
`goToReader`, eliminating the need to reload the epub in a callback.
- Extracted `ReaderUtils::saveProgress()` as a shared helper used by
both `EpubReaderActivity` and `KOReaderSyncActivity`.
- Added `STR_SAVE_PROGRESS_FAILED` to all 22 language files for the case
where writing the synced position to SD fails.
**Orientation fix (found during device testing):**
- `EpubReaderActivity::onExit()` resets the renderer to portrait before
destruction. With `replaceActivity` the reader is fully torn down before
KOSync starts, so KOSync was always rendering in portrait even when
reading in landscape. Fixed by calling `ReaderUtils::applyOrientation`
in `KOReaderSyncActivity::onEnter()`.
## Additional Context
Heap measurements on device (large EPUB with complex CSS):
| Metric | Before | After |
|---|---|---|
| Heap before Epub release | 88,156 bytes | — |
| Heap after Epub release | — | 153,892 bytes (+65,736) |
| Heap at TLS handshake | ~50,000 bytes (fails) | ~116,384 bytes
(passes) |
| Min-free-ever during sync session | 2,600 bytes | 33,052 bytes |
| TLS result | `MBEDTLS_ERR_X509_ALLOC_FAILED` | HTTP 200 |
Tested on device: sync from inside a large EPUB in both portrait and
landscape, cancel, apply remote progress, upload local progress.
---
### AI Usage
Did you use AI tools to help write this code? _**YES**_
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Add a complete SD card font subsystem that enables users to install and
use custom fonts beyond the three built-in families. This combines the
back-end firmware support (#1327) with the font configuration, build
pipeline, CI distribution, and user-facing management UI (#1392).
Core font system:
- Custom .cpfont binary format (v4) with multi-style support (regular,
bold, italic, bold-italic) packed into a single file per size
- On-demand glyph loading from SD card with two-pass prewarm rendering
to bulk-read glyphs per page, achieving near-flash performance for
Latin text (~697ms vs ~681ms) and viable CJK rendering (~32% slower)
- Persistent advance cache for layout measurement without SD I/O
- Overflow ring buffer for glyph cache misses during rendering
- Memory-conscious design: only advance tables kept in RAM; glyph
bitmaps, kern tables, and ligatures loaded on demand from SD
Font management:
- On-device WiFi download from GitHub Releases with manifest-based
discovery, install/update detection, and progress UI
- Web interface font upload, listing, and deletion via /fonts page
- Manual SD card copy to /fonts/ or /.fonts/ directories
- Font selection integrated into Settings > Reader > Font Family
Build pipeline:
- Declarative YAML config (sd-fonts.yaml) as single source of truth
for the 17-family font library (serif, sans, mono, accessibility)
- Python converter (fontconvert_sdcard.py) for TTF/OTF to .cpfont with
FreeType rasterization, class-based kerning, and ligature extraction
- Parallel build orchestrator with variable font instance extraction
- CI workflow publishing versioned + stable releases to a dedicated
crosspoint-fonts repository with auto-incrementing revision tags
- Centralized version constants (cpfont_version.py) shared across
build tooling and CI, with firmware headers as manual sync points
Additional fixes:
- CJK characters no longer get hyphens inserted at line breaks
- Advance table eliminates 30+ second stalls during CJK section
indexing for paragraphs with >512 unique codepoints
Closes#930
Co-authored-by: Zach Nelson <zach@zdnelson.com>
Co-authored-by: Justin <itsthisjustin@users.noreply.github.com>
Co-authored-by: jpirnay <jens@pirnay.com>
Co-authored-by: mcrosson <kemonine@kemonine.info>
## Summary
Add ability to show a status bar for 1-bit XTC files (closes#1848)
Overlays a status bar (similar style to that for epubs) over the image.
Defaults to hidden, users can set to show and either top or bottom of
the screen within "Customize Status Bar" reader settings.
I've leaned toward a simple overlay approach rather than trying anything
clever e.g. resizing the original image or allowing for shifting the
image around. I think it's more straight forward for the user to create
a buffer zone when generating the XTC files.
For 2-bit image files, it'd require more work to handle the multiple
render passes so I'm holding off on that.
Sample from a Japanese text XTC
<img width="400" height="600" alt="image"
src="https://github.com/user-attachments/assets/03ac67cf-acec-4b49-969f-73e3656760ce"
/>
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< YES | PARTIALLY | NO
>**_
YES - Codex
---------
Co-authored-by: Zach Nelson <zach@zdnelson.com>
## Summary
**What is the goal of this PR?**
Add Wi-Fi network management to the Web UI settings page, similar to
existing OPDS server management, so users can view, add, edit, and
delete saved Wi-Fi credentials from the browser. Closes
https://github.com/crosspoint-reader/crosspoint-reader/issues/1544 and
https://github.com/crosspoint-reader/crosspoint-reader/discussions/607
**What changes are included?**
- Added Wi-Fi API endpoints:
- GET /api/wifi Listing saved networks (without exposing plaintext
passwords)
- POST /api/wifi Creating/updating networks
- POST /api/wifi/delete Deleting networks by index
- Added a new Wi-Fi Networks management section web UI settings page
<img width="921" height="712" alt="image"
src="https://github.com/user-attachments/assets/42c20a63-f335-4389-8246-d38065d6b65a"
/>
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< YES >**_
---------
Co-authored-by: Copilot <copilot@github.com>
## Summary
* **What is the goal of this PR?**
Enhance file browser long-press behavior so the delete action now works
for both files and directories.
* **What changes are included?**
Updated `FileBrowserActivity.cpp` to support for directory deletion on
long-press
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
Deduplicated battery drawing code for Roundraff theme with other themes.
Now `BaseTheme` provides non-virtual `drawBatteryLeft` and
`drawBatteryRight` methods, which use a shared static
`drawBatteryOutline` implementation, and defer to a virtual
`fillBatteryIcon` implementation. In Classic and Roundraff
`fillBatteryIcon` uses a solid fill, while Lyra and Lyra Extended use a
segmented fill.
The charging indicator inside the battery was missing for Roundraff, but
is now consistent with other themes because of the shared drawing
implementation.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
## Summary
With the Roundraff theme selected and no recent books, the home screen
menu shows a "Continue Reading" option and menu handling is offset by
one ("Continue Reading" actually does "Browse Files", "File Transfer"
actually does "Settings", etc.) Simple fix here is to omit the "Continue
Reading" menu item when there are no recent books.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
When Power+Down is released with a slight stagger (Down before Power),
the Power release event leaked through to the activity loop, triggering
short-press Power actions like clip selection. Add a
screenshotComboActive flag that suppresses all input processing until
Power is fully released after a screenshot combo.
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
* **What changes are included?**
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**YES**_
## Summary
Before, any sub-activity of a reader activity needed to override
`isReaderActivity` to maintain correct bookkeeping through
`ActivityManager::isReaderActivity`. We could easily miss this in any
new sub-activities. Instead, simplify so each reader activity correctly
reports and then `ActivityManager` checks for any reader activity in its
stack.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
Simplify duplicated code in `XtcReaderActivity` to use
`ReaderUtils::detectPageTurn`. This implementation is now shared with
`EpubReaderActivity` and `TxtReaderActivity`. Also deduplicated the
chapter skip time constant.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
## Summary
* **What is the goal of this PR?** Fix the vertical misalignment between
the "File Manager" title and the action buttons (Upload / New Folder /
Delete Selected).
* **What changes are included?**
- `h2`: `margin-top: 0` → `margin: 0` — removes the default browser
`margin-bottom` that was inflating the height of the header-left flex
container, pushing the calculated flex center below the visual midpoint
of the title text
- `.page-header-left`: `align-items: baseline` → `align-items: center` —
ensures the title and breadcrumbs are center-aligned with each other and
with the buttons
### Before
<img width="1198" height="560" alt="Screenshot From 2026-04-30 22-29-28"
src="https://github.com/user-attachments/assets/b9a43069-cd93-4028-ab21-75be253ed1f0"
/>
### After
<img width="1198" height="560" alt="Screenshot From 2026-04-30 22-48-49"
src="https://github.com/user-attachments/assets/b9977c65-e479-4490-8ec3-15ae99cfccd7"
/>
## Additional Context
Small CSS-only change, no JavaScript or HTML structure touched.
---
### AI Usage
Did you use AI tools to help write this code? _**YES**_
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
## Summary
* **What is the goal of this PR?**
I was seeing hangs during File Transfer. Troubleshooting via serial
showed it had to do with the SHUTTING_DOWN state. Strengthened the WiFi
State Machine a bit and added self-healing. Additionally, I found it
obnoxious to need to keep referring to serial for my wifi strength, so a
dBm meter is added opposing the SSID when on the File Transfer page.
* **What changes are included?**
The dBm meter was at risk of causing rapid screen updates (if, say, we
hovered right around a threshold), so I've implemented a basic
hysteresis around this. RISING/FALLING would be more canonical variable
names, but are reserved in the framework.
## Additional Context
My X4 has a terrible antenna, apparently, and I was running into this
failure condition pretty regularly. Wifi "bars" were chosen as a
relatively pan-cultural glyph rather than relying on localization.
Tested on hardware at -83 dBm under sustained EPUB upload (60 books, ~30
MB). Transient losses up to ~14s now ride through; pre-fix the same
losses required a power-cycle after as little as a 2s blip.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? Nope. Commits are hand
written. Claude was used to build a local test harness for validation
only during iteration.
Jeremy Klein