Tiled grayscale rendering to drop the storeBwBuffer peak largest contiguous free block (the value that actually drives OOM on the C3) from ~114 KB to ~82-90 KB. This renders each grayscale plane band-by-band into a small (~8 KB) scratch and streams each band straight to controller RAM (community-sdk writeGrayscalePlaneStrip), leaving the BW framebuffer intact. No save, no restore; controller RAM is re-synced for the next differential turn directly from the live framebuffer. Three writers honor the active band target so per-band re-rendering stays cheap and correct: - drawPixel (text) redirects writes to the band scratch and clips to it. - renderCharImpl skips glyphs whose physical y-extent is outside the band before the bitmap decode (glyphIntersectsStrip), so the per-band re-render doesn't pay N x glyph decode. - DirectPixelWriter (images) writes the band scratch via getWriteTarget instead of the framebuffer. Without this, image pixels wrote the live BW frame directly and cleanup re-synced that corruption, leaving thin outlines after navigating away from an image. Controller specifics live in the SDK (X4 setRamArea windowing, X3 PTL); the reader checks supportsStripGrayscale() and is otherwise controller-agnostic. Measured on hardware (X4 and X3, text and images, visually correct): - Grayscale scratch ~8 KB vs ~50 KB save; largest contiguous free block held at full size during grayscale instead of dropping ~25-32 KB. - X4 text page about +25 ms/page; X3 page time is dominated by its intrinsic grayscale refresh, not tiling. Depends on community-sdk #13 (the writeGrayscalePlaneStrip API). The submodule bump here points at that branch, so until #13 merges the submodule won't resolve from upstream and CI will fail there; keeping this a draft until then. Will rebase onto master and re-point the submodule to the merged SDK commit once #13 lands. Did you use AI tools to help write this code? partial
244 lines
13 KiB
C++
244 lines
13 KiB
C++
#pragma once
|
|
|
|
#include <EpdFontFamily.h>
|
|
#include <HalDisplay.h>
|
|
|
|
class FontCacheManager;
|
|
class SdCardFont;
|
|
|
|
#include <cstring>
|
|
#include <map>
|
|
#include <string>
|
|
#include <vector>
|
|
|
|
#include "Bitmap.h"
|
|
|
|
// Color representation: uint8_t mapped to 4x4 Bayer matrix dithering levels
|
|
// 0 = transparent, 1-16 = gray levels (white to black)
|
|
enum Color : uint8_t { Clear = 0x00, White = 0x01, LightGray = 0x05, DarkGray = 0x0A, Black = 0x10 };
|
|
|
|
class GfxRenderer {
|
|
public:
|
|
enum RenderMode { BW, GRAYSCALE_LSB, GRAYSCALE_MSB };
|
|
|
|
// Logical screen orientation from the perspective of callers
|
|
enum Orientation {
|
|
Portrait, // 480x800 logical coordinates (current default)
|
|
LandscapeClockwise, // 800x480 logical coordinates, rotated 180° (swap top/bottom)
|
|
PortraitInverted, // 480x800 logical coordinates, inverted
|
|
LandscapeCounterClockwise // 800x480 logical coordinates, native panel orientation
|
|
};
|
|
|
|
private:
|
|
static constexpr size_t BW_BUFFER_CHUNK_SIZE = 8000; // 8KB chunks to allow for non-contiguous memory
|
|
|
|
HalDisplay& display;
|
|
RenderMode renderMode;
|
|
Orientation orientation;
|
|
bool fadingFix;
|
|
uint8_t* frameBuffer = nullptr;
|
|
uint16_t panelWidth = HalDisplay::DISPLAY_WIDTH;
|
|
uint16_t panelHeight = HalDisplay::DISPLAY_HEIGHT;
|
|
uint16_t panelWidthBytes = HalDisplay::DISPLAY_WIDTH_BYTES;
|
|
uint32_t frameBufferSize = HalDisplay::BUFFER_SIZE;
|
|
std::vector<uint8_t*> bwBufferChunks;
|
|
std::map<int, EpdFontFamily> fontMap;
|
|
// Mutable because ensureSdCardFontReady() is const (called from layout code
|
|
// that holds a const GfxRenderer&) but triggers SD card reads and heap
|
|
// allocation inside the SdCardFont objects. Same pragmatic compromise as
|
|
// fontCacheManager_ below.
|
|
mutable std::map<int, SdCardFont*> sdCardFonts_;
|
|
|
|
// Mutable because drawText() is const but needs to delegate scan-mode
|
|
// recording to the (non-const) FontCacheManager. Same pragmatic compromise
|
|
// as before, concentrated in a single pointer instead of four fields.
|
|
mutable FontCacheManager* fontCacheManager_ = nullptr;
|
|
|
|
// Tiled grayscale strip target. When active, drawPixel()/clearScreen()
|
|
// operate on a caller-owned scratch holding one horizontal band of physical
|
|
// rows [_stripY0, _stripY0 + _stripRows) (panelWidthBytes wide) instead of
|
|
// the shared framebuffer, clipping pixels outside the band. Lets grayscale
|
|
// planes render band-by-band straight to the controller without destroying
|
|
// the BW framebuffer (no storeBwBuffer). Mutable because the render path is
|
|
// const. See beginStripTarget()/endStripTarget().
|
|
mutable uint8_t* _stripBuf = nullptr;
|
|
mutable int _stripY0 = 0;
|
|
mutable int _stripRows = 0;
|
|
mutable bool _stripActive = false;
|
|
|
|
void renderChar(const EpdFontFamily& fontFamily, uint32_t cp, int* x, int* y, bool pixelState,
|
|
EpdFontFamily::Style style) const;
|
|
void freeBwBufferChunks();
|
|
template <Color color>
|
|
void drawPixelDither(int x, int y) const;
|
|
template <Color color>
|
|
void fillArc(int maxRadius, int cx, int cy, int xDir, int yDir) const;
|
|
|
|
public:
|
|
explicit GfxRenderer(HalDisplay& halDisplay)
|
|
: display(halDisplay), renderMode(BW), orientation(Portrait), fadingFix(false) {}
|
|
~GfxRenderer() { freeBwBufferChunks(); }
|
|
|
|
static constexpr int VIEWABLE_MARGIN_TOP = 9;
|
|
static constexpr int VIEWABLE_MARGIN_RIGHT = 3;
|
|
static constexpr int VIEWABLE_MARGIN_BOTTOM = 3;
|
|
static constexpr int VIEWABLE_MARGIN_LEFT = 3;
|
|
|
|
// Setup
|
|
void begin(); // must be called right after display.begin()
|
|
void insertFont(int fontId, EpdFontFamily font);
|
|
// Clears both the flash-font map and any SD-font registration for fontId.
|
|
// Coupled to avoid dangling SdCardFont* in sdCardFonts_ when callers free
|
|
// the underlying SdCardFont and forget the SD-side unregister.
|
|
void removeFont(int fontId) {
|
|
fontMap.erase(fontId);
|
|
sdCardFonts_.erase(fontId);
|
|
}
|
|
void setFontCacheManager(FontCacheManager* m) { fontCacheManager_ = m; }
|
|
FontCacheManager* getFontCacheManager() const { return fontCacheManager_; }
|
|
const std::map<int, EpdFontFamily>& getFontMap() const { return fontMap; }
|
|
void registerSdCardFont(int fontId, SdCardFont* font) { sdCardFonts_[fontId] = font; }
|
|
void unregisterSdCardFont(int fontId) { removeFont(fontId); }
|
|
void clearSdCardFonts() { sdCardFonts_.clear(); }
|
|
const std::map<int, SdCardFont*>& getSdCardFonts() const { return sdCardFonts_; }
|
|
bool isSdCardFont(int fontId) const { return sdCardFonts_.count(fontId) > 0; }
|
|
// Ensure SD card font glyph data is loaded for the given text. Called from layout code
|
|
// (which holds a const GfxRenderer&) before measuring word widths. Safe to call on non-SD fonts (no-op).
|
|
// styleMask: bitmask of styles to prepare (bit 0=regular, 1=bold, 2=italic, 3=bold-italic).
|
|
void ensureSdCardFontReady(int fontId, const char* utf8Text, uint8_t styleMask = 0x0F) const;
|
|
void ensureSdCardFontReady(int fontId, const std::vector<std::string>& words, bool includeHyphen,
|
|
uint8_t styleMask = 0x0F) const;
|
|
|
|
// Orientation control (affects logical width/height and coordinate transforms)
|
|
void setOrientation(const Orientation o) { orientation = o; }
|
|
Orientation getOrientation() const { return orientation; }
|
|
|
|
// Fading fix control
|
|
void setFadingFix(const bool enabled) { fadingFix = enabled; }
|
|
|
|
// Screen ops
|
|
int getScreenWidth() const;
|
|
int getScreenHeight() const;
|
|
void displayBuffer(HalDisplay::RefreshMode refreshMode = HalDisplay::FAST_REFRESH) const;
|
|
// EXPERIMENTAL: Windowed update - display only a rectangular region
|
|
// void displayWindow(int x, int y, int width, int height) const;
|
|
void invertScreen() const;
|
|
void clearScreen(uint8_t color = 0xFF) const;
|
|
void getOrientedViewableTRBL(int* outTop, int* outRight, int* outBottom, int* outLeft) const;
|
|
|
|
// Tiled grayscale strip target. While active, drawPixel() and clearScreen()
|
|
// operate on `scratch` (panelWidthBytes * stripRows bytes, holding physical
|
|
// rows [stripY0, stripY0 + stripRows)) instead of the framebuffer; pixels
|
|
// whose physical row falls outside the band are clipped. The clip is applied
|
|
// after the orientation rotate, so it is orientation-agnostic. Used to render
|
|
// grayscale planes band-by-band without a full second buffer.
|
|
void beginStripTarget(uint8_t* scratch, int stripY0, int stripRows) const;
|
|
void endStripTarget() const;
|
|
|
|
// Band culling for tiled grayscale. Takes a glyph bounding box in logical
|
|
// screen coords and returns false only when a strip is active AND the box's
|
|
// physical y-extent lies entirely outside the active band, letting callers
|
|
// skip an expensive bitmap decode. Returns true when no strip is active.
|
|
// Corners are rotated to physical, so it is orientation-aware.
|
|
bool glyphIntersectsStrip(int x0, int y0, int x1, int y1) const;
|
|
|
|
// Active pixel-write target for raw writers (DirectPixelWriter) that bypass
|
|
// drawPixel for speed. When a strip target is active these return the band
|
|
// scratch plus its physical-row origin and extent; otherwise the full
|
|
// framebuffer ([0, panelHeight)). Writers subtract the origin and clip to the
|
|
// extent, so they honor tiled-grayscale banding without per-pixel method calls.
|
|
uint8_t* getWriteTarget() const { return _stripActive ? _stripBuf : frameBuffer; }
|
|
int getWriteOriginY() const { return _stripActive ? _stripY0 : 0; }
|
|
int getWriteRows() const { return _stripActive ? _stripRows : panelHeight; }
|
|
|
|
// Drawing
|
|
void drawPixel(int x, int y, bool state = true) const;
|
|
void drawLine(int x1, int y1, int x2, int y2, bool state = true) const;
|
|
void drawLine(int x1, int y1, int x2, int y2, int lineWidth, bool state) const;
|
|
void drawArc(int maxRadius, int cx, int cy, int xDir, int yDir, int lineWidth, bool state) const;
|
|
void drawRect(int x, int y, int width, int height, bool state = true) const;
|
|
void drawRect(int x, int y, int width, int height, int lineWidth, bool state) const;
|
|
void drawRoundedRect(int x, int y, int width, int height, int lineWidth, int cornerRadius, bool state) const;
|
|
void drawRoundedRect(int x, int y, int width, int height, int lineWidth, int cornerRadius, bool roundTopLeft,
|
|
bool roundTopRight, bool roundBottomLeft, bool roundBottomRight, bool state) const;
|
|
void maskRoundedRectOutsideCorners(int x, int y, int width, int height, int radius, Color color = Color::White) const;
|
|
void fillRect(int x, int y, int width, int height, bool state = true) const;
|
|
void fillRectDither(int x, int y, int width, int height, Color color) const;
|
|
void fillRoundedRect(int x, int y, int width, int height, int cornerRadius, Color color) const;
|
|
void fillRoundedRect(int x, int y, int width, int height, int cornerRadius, bool roundTopLeft, bool roundTopRight,
|
|
bool roundBottomLeft, bool roundBottomRight, Color color) const;
|
|
void drawImage(const uint8_t bitmap[], int x, int y, int width, int height) const;
|
|
void drawIcon(const uint8_t bitmap[], int x, int y, int width, int height) const;
|
|
void drawBitmap(const Bitmap& bitmap, int x, int y, int maxWidth, int maxHeight, float cropX = 0,
|
|
float cropY = 0) const;
|
|
void drawBitmap1Bit(const Bitmap& bitmap, int x, int y, int maxWidth, int maxHeight) const;
|
|
void fillPolygon(const int* xPoints, const int* yPoints, int numPoints, bool state = true) const;
|
|
|
|
// Text
|
|
int getTextWidth(int fontId, const char* text, EpdFontFamily::Style style = EpdFontFamily::REGULAR) const;
|
|
void drawCenteredText(int fontId, int y, const char* text, bool black = true,
|
|
EpdFontFamily::Style style = EpdFontFamily::REGULAR) const;
|
|
void drawText(int fontId, int x, int y, const char* text, bool black = true,
|
|
EpdFontFamily::Style style = EpdFontFamily::REGULAR) const;
|
|
int getSpaceWidth(int fontId, EpdFontFamily::Style style = EpdFontFamily::REGULAR) const;
|
|
/// Returns the total inter-word advance: fp4::toPixel(spaceAdvance + kern(leftCp,' ') + kern(' ',rightCp)).
|
|
/// Using a single snap avoids the +/-1 px rounding error that arises when space advance and kern are
|
|
/// snapped separately and then added as integers.
|
|
int getSpaceAdvance(int fontId, uint32_t leftCp, uint32_t rightCp, EpdFontFamily::Style style) const;
|
|
/// Returns the kerning adjustment between two adjacent codepoints.
|
|
int getKerning(int fontId, uint32_t leftCp, uint32_t rightCp, EpdFontFamily::Style style) const;
|
|
int getTextAdvanceX(int fontId, const char* text, EpdFontFamily::Style style) const;
|
|
int getFontAscenderSize(int fontId) const;
|
|
int getLineHeight(int fontId) const;
|
|
std::string truncatedText(int fontId, const char* text, int maxWidth,
|
|
EpdFontFamily::Style style = EpdFontFamily::REGULAR) const;
|
|
/// Word-wrap \p text into at most \p maxLines lines, each no wider than
|
|
/// \p maxWidth pixels. Overflowing words and excess lines are UTF-8-safely
|
|
/// truncated with an ellipsis (U+2026).
|
|
std::vector<std::string> wrappedText(int fontId, const char* text, int maxWidth, int maxLines,
|
|
EpdFontFamily::Style style = EpdFontFamily::REGULAR) const;
|
|
|
|
// Helper for drawing rotated text (90 degrees clockwise, for side buttons)
|
|
void drawTextRotated90CW(int fontId, int x, int y, const char* text, bool black = true,
|
|
EpdFontFamily::Style style = EpdFontFamily::REGULAR) const;
|
|
int getTextHeight(int fontId) const;
|
|
|
|
// Grayscale functions
|
|
void setRenderMode(const RenderMode mode) { this->renderMode = mode; }
|
|
RenderMode getRenderMode() const { return renderMode; }
|
|
void copyGrayscaleLsbBuffers() const;
|
|
void copyGrayscaleMsbBuffers() const;
|
|
void displayGrayBuffer() const;
|
|
|
|
// Tiled grayscale (X4): stream one band of a plane straight to controller RAM
|
|
// from `scratch` (panelWidthBytes * numRows, physical rows [yStart, yStart+
|
|
// numRows)), bypassing the framebuffer. supportsStripGrayscale() gates use.
|
|
void writeGrayscalePlaneStrip(bool lsbPlane, const uint8_t* scratch, int yStart, int numRows) const;
|
|
bool supportsStripGrayscale() const;
|
|
bool storeBwBuffer(); // Returns true if buffer was stored successfully
|
|
void restoreBwBuffer(); // Restore and free the stored buffer
|
|
void cleanupGrayscaleWithFrameBuffer() const;
|
|
|
|
// Font helpers
|
|
const uint8_t* getGlyphBitmap(const EpdFontData* fontData, const EpdGlyph* glyph) const;
|
|
|
|
// Low level functions
|
|
uint8_t* getFrameBuffer() const;
|
|
size_t getBufferSize() const;
|
|
uint16_t getDisplayWidth() const { return panelWidth; }
|
|
uint16_t getDisplayHeight() const { return panelHeight; }
|
|
uint16_t getDisplayWidthBytes() const { return panelWidthBytes; }
|
|
|
|
// Region cache: take a logical (orientation-aware) rect, hit the framebuffer
|
|
// bytes that the rect can have touched, and pump them in or out of a caller-
|
|
// supplied buffer. Used by HomeActivity to snapshot just the cover tile
|
|
// (~16 KB in Portrait) instead of cloning the entire 48 KB framebuffer.
|
|
//
|
|
// getRegionByteSize: required buffer length for the rect at current orientation.
|
|
// copyRegionToBuffer / copyBufferToRegion: false if `bufSize` is smaller than that.
|
|
size_t getRegionByteSize(int logicalX, int logicalY, int logicalW, int logicalH) const;
|
|
bool copyRegionToBuffer(int logicalX, int logicalY, int logicalW, int logicalH, uint8_t* buf, size_t bufSize) const;
|
|
bool copyBufferToRegion(int logicalX, int logicalY, int logicalW, int logicalH, const uint8_t* buf,
|
|
size_t bufSize) const;
|
|
};
|