Script-range boundaries alone don't bound group size — dense Unicode
blocks (CJK, user fonts) can produce groups of hundreds of KB. Add a
64 KB hard cap: when adding the next glyph would exceed it, close the
current group and start a new one with the same script ID.
64 KB is well above the largest current built-in group (~50 KB for
notosans_18 Cyrillic) and a safe transient malloc on the ESP32-C3.
The decompressor side already handles any number of groups per font.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The hot group buffer (formerly up to 50 KB BSS / heap) is removed.
During prewarm, each group is now decompressed into a transient malloc
that is freed immediately after its glyphs are extracted — only one
group buffer and the page buffer coexist at a time.
For getBitmap() cache misses (rare: only hit when a glyph wasn't
covered by prewarm), the group is also decompressed transiently and
freed after the single glyph is compacted into _hotGlyphBuf.
Peak heap during prewarm is now: page buffer + one group buffer.
Outside of prewarm, heap usage is only the page buffer itself.
Works correctly for large future fonts (Vietnamese, CJK) regardless
of group size, with no permanent allocation overhead.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace the 50 KB static BSS _hotGroupBuf array with a heap pointer
allocated once per font (ensureHotGroupBuf). The buffer is sized to the
largest group in the active font — 6 KB for small fonts, ~50 KB for 18pt
— so no memory is wasted when rendering body text at typical sizes.
The buffer persists across pages (freed only in freeHotGroup/deinit),
so there is exactly one malloc per font session rather than one per page.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- FontDecompressor: replace heap-allocated std::vector hot-group and glyph
scratch buffers with static BSS arrays, eliminating per-page malloc/free
and the heap fragmentation it causes during rendering
- FontDecompressor: add bounds checks on group/glyph buffer sizes; sort
prewarm group list by ascending index for sequential flash reads
- ParsedText: upgrade line-break cost function to Knuth-Plass cubic badness
(strongly penalises very loose lines, lenient on moderate looseness)
- ParsedText: exclude gaps before closing punctuation (. , ) » etc.) from
justification distribution so they stay at natural space width
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
**What is the goal of this PR?**
A tweak to the fixed-point x-advance and kerning calculations to ensure
that the spacing between any two glyphs is always calculated
consistently.
I noticed that sometimes I'd see common character pairs like "oo" more
than once on a page, and the distance between the two snapped to
different pixels depending on the running accumulated error for the line
of text.
This change uses a differential rounding approach where each glyph's
x-advance plus the kerning relative to the next glyph are combined in
fixed-point precision, then snapped to a pixel to draw the next glyph.
This results in a consistent inter-glyph spacing any time the same two
glyphs show up adjacent to each other, regardless of the accumulated
error across the line.
---
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
## Summary
**What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
Fix prewarm perf when a page contains many styles.
The prewarm page buffer was a single slot, so each `prewarmCache` call
for a new font style freed the previous style's glyphs. On pages with
multiple styles (regular + bold + italic), only the last style was
prewarmed. The others fell through to the hot-group compaction path at
~2-3ms per glyph.
This was most visible on rich formatting (e.g. this [Czech prayer
book](https://stahuj.kancional.cz/e-kniha/kancional.epub) with bold
headings, italic liturgical text, and regular body), where page renders
took 3-5 seconds instead of ~700ms.
Fix: use up to 4 page buffer slots (one per font style) so all styles
stay prewarmed simultaneously.
Fixes#1450.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? PARTIALLY: to diagnose and
brainstorm solutions.
## Purpose
This PR includes some preparatory changes that are needed for an
upcoming performant CJK font feature. The changes have no impact on
render time and heap allocation for latin text. **Despite this, I think
these changes stand on their own as a better font
compression/decompression implementation.**
## Summary
- Font decompressor rewrite: Replaced the 4-slot LRU group cache with a
two-tier system — a page buffer (glyphs prewarmed before rendering
begins) and a hot-group fallback (last decompressed group retained for
non-prewarmed
glyphs).
- Byte-aligned compressed bitmap format: Glyph bitmaps within compressed
groups are now stored row-padded rather than tightly packed before
DEFLATE compression, improving compression ratios by making identical
pixel rows produce
identical byte patterns. Glyphs are compacted back to packed format on
demand at render time. Reduces flash size by 155 KB.
- Page prewarm system: Added `Page::collectText` and
`Page::getDominantStyle` to extract per-style glyph requirements before
rendering, and `GfxRenderer::prewarmFontCache` to pre-decompress only
the groups needed for the dominant style
— eliminating mid-render decompression for the common case.
- UTF-8 robustness fixes: `utf8NextCodepoint` now validates continuation
bytes and returns a replacement glyph on malformed input;
`ChapterHtmlSlimParser` correctly preserves incomplete multi-byte
sequences across word-buffer flush
boundaries rather than splitting them.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**YES**_ Architecture and
design was done by me, refined a bit by Claude. Code mostly by Claude,
but not entirely.
## Summary
**What is the goal of this PR?**
Hopefully fixes#1182.
_Note: I think letterforms got a "heavier" appearance after #1098, which
makes this more noticeable. The current version of this PR reverts the
change to add `--force-autohint` for Bookerly, which to me seems to
bring the font back to a more aesthetic and consistent weight._
#### Problem
Character spacing was uneven in certain words. The word "drew" in
Bookerly was the clearest example: a visible gap between `d` and `r`,
while `e` and `w` appeared tightly condensed. The root cause was
twofold:
1. **Integer-only glyph advances.** `advanceX` was stored as a `uint8_t`
of whole pixels, sourced from FreeType's hinted `advance.x` (which
grid-fits to integers). A glyph whose true advance is 15.56px was stored
as 16px -- an error of +0.44px per character that compounds across a
line.
2. **Floor-rounded kerning.** Kern adjustments were converted with
`math.floor()`, which systematically over-tightened negative kerns. A
kern of -0.3px became -1px -- a 0.7px over-correction that visibly
closed gaps.
Combined, these produced the classic symptom: some pairs too wide,
others too tight, with the imbalance varying per word.
#### Solution: fixed-point accumulation with 1/16-pixel resolution, for
sub-pixel precision during text layout
All font metrics now use a "fixed-point 4" format -- 4 fractional bits
giving 1/16-pixel (0.0625px) resolution. This is implemented with plain
integer arithmetic (shifts and adds), requiring no floating-point on the
ESP32.
**How it works:**
A value like 15.56px is stored as the integer `249`:
```
249 = 15 * 16 + 9 (where 9/16 = 0.5625, closest to 0.56)
```
Two storage widths share the same 4 fractional bits:
| Field | Type | Format | Range | Use |
|-------|------|--------|-------|-----|
| `advanceX` | `uint16_t` | 12.4 | 0 -- 4095.9375 px | Glyph advance
width |
| `kernMatrix` | `int8_t` | 4.4 | -8.0 -- +7.9375 px | Kerning
adjustment |
Because both have 4 fractional bits, they add directly into a single
`int32_t` accumulator during layout. The accumulator is only snapped to
the nearest whole pixel at the moment each glyph is rendered:
```cpp
int32_t xFP = fp4::fromPixel(startX); // pixel to 12.4: startX << 4
for each character:
xFP += kernFP; // add 4.4 kern (sign-extends into int32_t)
int xPx = fp4::toPixel(xFP); // snap to nearest pixel: (xFP + 8) >> 4
render glyph at xPx;
xFP += glyph->advanceX; // add 12.4 advance
```
Fractional remainders carry forward indefinitely. Rounding errors stay
below +/- 0.5px and never compound.
#### Concrete example: "drew" in Bookerly
**Before** (integer advances, floor-rounded kerning):
| Char | Advance | Kern | Cursor | Snap | Gap from prev |
|------|---------|------|--------|------|---------------|
| d | 16 px | -- | 33 | 33 | -- |
| r | 12 px | 0 | 49 | 49 | ~2px |
| e | 13 px | -1 | 60 | 60 | ~0px |
| w | 22 px | -1 | 72 | 72 | ~0px |
The d-to-r gap was visibly wider than the tightly packed `rew`.
**After** (12.4 advances, 4.4 kerning, fractional accumulation):
| Char | Advance (FP) | Kern (FP) | Accumulator | Snap | Ink start | Gap
from prev |
|------|-------------|-----------|-------------|------|-----------|---------------|
| d | 249 (15.56px) | -- | 528 | 33 | 34 | -- |
| r | 184 (11.50px) | 0 | 777 | 49 | 49 | 0px |
| e | 208 (13.00px) | -8 (-0.50px) | 953 | 60 | 61 | 1px |
| w | 356 (22.25px) | -4 (-0.25px) | 1157 | 72 | 72 | 0px |
Spacing is now `0, 1, 0` pixels -- nearly uniform. Verified on-device:
all 5 copies of "drew" in the test EPUB produce identical spacing,
confirming zero accumulator drift.
#### Changes
**Font conversion (`fontconvert.py`)**
- Use `linearHoriAdvance` (FreeType 16.16, unhinted) instead of
`advance.x` (26.6, grid-fitted to integers) for glyph advances
- Encode kern values as 4.4 fixed-point with `round()` instead of
`floor()`
- Add `fp4_from_ft16_16()` and `fp4_from_design_units()` helper
functions
- Add module-level documentation of fixed-point conventions
**Font data structures (`EpdFontData.h`)**
- `EpdGlyph::advanceX`: `uint8_t` to `uint16_t` (no memory cost due to
existing struct padding)
- Add `fp4` namespace with `constexpr` helpers: `fromPixel()`,
`toPixel()`, `toFloat()`
- Document fixed-point conventions
**Font API (`EpdFont.h/cpp`, `EpdFontFamily.h/cpp`)**
- `getKerning()` return type: `int8_t` to `int` (to avoid truncation of
the 4.4 value)
**Rendering (`GfxRenderer.cpp`)**
- `drawText()`: replace integer cursor with `int32_t` fixed-point
accumulator
- `drawTextRotated90CW()`: same accumulator treatment for vertical
layout
- `getTextAdvanceX()`, `getSpaceWidth()`, `getSpaceKernAdjust()`,
`getKerning()`: convert from fixed-point to pixel at API boundary
**Regenerated all built-in font headers** with new 12.4 advances and 4.4
kern values.
#### Memory impact
Zero additional RAM. The `advanceX` field grew from `uint8_t` to
`uint16_t`, but the `EpdGlyph` struct already had 1 byte of padding at
that position, so the struct size is unchanged. The fixed-point
accumulator is a single `int32_t` on the stack.
#### Test plan
- [ ] Verify "drew" spacing in Bookerly at small, medium, and large
sizes
- [ ] Verify uppercase kerning pairs: AVERY, WAVE, VALUE
- [ ] Verify ligature words: coffee, waffle, office
- [ ] Verify all built-in fonts render correctly at each size
- [ ] Verify rotated text (progress bar percentage) renders correctly
- [ ] Verify combining marks (accented characters) still position
correctly
- [ ] Spot-check a full-length book for any layout regressions
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**YES, Claude Opus 4.6
helped figure out a non-floating point approach for sub-pixel error
accumulation**_
## Summary
**What is the goal of this PR?**
Rewrite of font routines to use std binary search algorithms instead of
custom repeated implementations: `lookupKernClass`,
`EpdFont::getLigature`, and `EpdFont::getGlyph`.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
**What is the goal of this PR?**
Correction to #1157, which (embarrassingly) failed to actually include
the updated font header files. (Maybe we should generate these at build
time?)
Add Latin Extended-B glyphs for Croatian, Romanian, Pinyin, and European
diacritical variants. Fixes#921.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY, confirmed
codepoint ranges with Claude**_
## Summary
**What is the goal of this PR?**
Add Latin Extended-B glyphs for Croatian, Romanian, Pinyin, and European
diacritical variants. Fixes#921.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY, confirmed
codepoint ranges with Claude**_
## Summary
* **What is the goal of this PR?**
Add Vietnamese glyphs support for the reader's built-in fonts, enabling
proper rendering of Vietnamese text in EPUB content.
* **What changes are included?**
- Added 3 new Unicode intervals to `fontconvert.py` covering Vietnamese
characters:
- **Latin Extended-B** (Vietnamese subset only): `U+01A0–U+01B0` — Ơ/ơ,
Ư/ư
- **Vietnamese Extended**: `U+1EA0–U+1EF9` — All precomposed Vietnamese
characters with tone marks (Ả, Ấ, Ầ, Ẩ, Ẫ, Ậ, Ắ, …, Ỹ)
- Re-generated all 54 built-in font header files (Bookerly, Noto Sans,
OpenDyslexic, Ubuntu across all sizes and styles) to include the new
Vietnamese glyphs.
## Additional Context
* **Scope**: This PR only covers the **reader** fonts. The outer UI
still uses the Ubuntu font which does not fully support Vietnamese — UI
and i18n will be addressed in a follow-up PR (per discussion in PR
#1124).
* **Memory impact**:
| Metric | Before | After | Delta |
|---|---|---|---|
| Flash Data (`.rodata`) | 2,971,028 B | 3,290,748 B | **+319,720 B
(+10.8%)** |
| Total image size | 4,663,235 B | 4,982,955 B | **+319,720 B (+6.9%)**
|
| Flash usage | 69.1% | 74.0% | **+4.9 pp** |
| RAM usage | 29.0% | 29.0% | **No change** |
* **Risk**: Low — this is a data-only change (font glyph tables in
`.rodata`). No logic changes, no RAM impact. Flash headroom remains
comfortable at 74%.
---
### AI Usage
Did you use AI tools to help write this code? _**PARTIALLY**_
AI was used to identify the minimal set of Unicode ranges needed for
Vietnamese support and to assist with the PR description.
---------
Co-authored-by: danoooob <danoooob@example.com>
## Summary
**What is the goal of this PR?**
Improved typesetting, including
[kerning](https://en.wikipedia.org/wiki/Kerning) and
[ligatures](https://en.wikipedia.org/wiki/Ligature_(writing)#Latin_alphabet).
**What changes are included?**
- The script to convert built-in fonts now adds kerning and ligature
information to the generated font headers.
- Epub page layout calculates proper kerning spaces and makes ligature
substitutions according to the selected font.
## Additional Context
- I am not a typography expert.
- The implementation has been reworked from the earlier version, so it
is no longer necessary to omit Open Dyslexic, and kerning data now
covers all fonts, styles, and codepoints for which we include bitmap
data.
- Claude Opus 4.6 helped with a lot of this.
- There's an included test epub document with lots of kerning and
ligature examples, shown in the photos.
**_After some time to mature, I think this change is in decent shape to
merge and get people testing._**
After opening this PR I came across #660, which overlaps in adding
ligature support.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**YES, Claude Opus 4.6**_
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
## Summary
Bookerly's native TrueType hinting is effectively a no-op at the sizes
used here, causing FreeType to place stems at inconsistent sub-pixel
positions. This results in the 'k' stem (8-bit fringe: 0x38=56) falling
just below the 2-bit quantization threshold while 'l' and 'h' stems
(fringes: 0x4C=76, 0x40=64) land above it --- making 'k' visibly
narrower (2.00px vs 2.33px effective width).
FreeType's auto-hinter snaps all stems to consistent grid positions,
normalizing effective stem width to 2.67px across all glyphs.
Adds --force-autohint flag to fontconvert.py and applies it to Bookerly
only. NotoSans, OpenDyslexic, and Ubuntu fonts are unaffected.
Here is an example of before/after. Take notice of the vertical stems on
characters like `l`, `k`, `n`, `i`, etc. The font is Bookerly 12pt
regular:
**BEFORE**:
**AFTER**:
Claude generated this script to quantitatively determine that this
change makes the vertical stems on a variety of characters more
consistent for Bookerly _only_.
<details>
<summary>Python script</summary>
```python
#!/usr/bin/env python3
"""Compare stem consistency across all font families with and without
auto-hinting.
Run from repo root:
python3 compare_all_fonts.py
"""
import freetype
DPI = 150
CHARS = ["k", "l", "h", "i", "b", "d"]
SIZES = [12, 14, 16, 18]
FONTS = {
"Bookerly":
"lib/EpdFont/builtinFonts/source/Bookerly/Bookerly-Regular.ttf",
"NotoSans":
"lib/EpdFont/builtinFonts/source/NotoSans/NotoSans-Regular.ttf",
"OpenDyslexic":
"lib/EpdFont/builtinFonts/source/OpenDyslexic/OpenDyslexic-Regular.otf",
"Ubuntu": "lib/EpdFont/builtinFonts/source/Ubuntu/Ubuntu-Regular.ttf",
}
MODES = {
"default": freetype.FT_LOAD_RENDER,
"autohint": freetype.FT_LOAD_RENDER | freetype.FT_LOAD_FORCE_AUTOHINT,
}
def q4to2(v):
if v >= 12:
return 3
elif v >= 8:
return 2
elif v >= 4:
return 1
else:
return 0
def get_stem_eff(face, char, flags):
gi = face.get_char_index(ord(char))
if gi == 0:
return None
face.load_glyph(gi, flags)
bm = face.glyph.bitmap
w, h = bm.width, bm.rows
if w == 0 or h == 0:
return None
p2 = []
for y in range(h):
row = []
for x in range(w):
row.append(q4to2(bm.buffer[y * bm.pitch + x] >> 4))
p2.append(row)
# Measure leftmost stem in stable middle rows
mid_start, mid_end = h // 4, h - h // 4
widths = []
for y in range(mid_start, mid_end):
first = next((x for x in range(w) if p2[y][x] > 0), -1)
if first < 0:
continue
last = first
for x in range(first, w):
if p2[y][x] > 0:
last = x
else:
break
eff = sum(p2[y][x] for x in range(first, last + 1)) / 3.0
widths.append(eff)
return round(sum(widths) / len(widths), 2) if widths else None
def main():
for font_name, font_path in FONTS.items():
try:
freetype.Face(font_path)
except Exception:
print(f"\n {font_name}: SKIPPED (file not found)")
continue
print(f"\n{'=' * 80}")
print(f" {font_name}")
print(f"{'=' * 80}")
for size in SIZES:
print(f"\n {size}pt:")
print(f" {'':6s}", end="")
for c in CHARS:
print(f" '{c}' ", end="")
print(" | spread")
for mode_name, flags in MODES.items():
face = freetype.Face(font_path)
face.set_char_size(size << 6, size << 6, DPI, DPI)
vals = []
print(f" {mode_name:6s}", end="")
for c in CHARS:
v = get_stem_eff(face, c, flags)
vals.append(v)
print(f" {v:5.2f}" if v else " N/A", end="")
valid = [v for v in vals if v is not None]
spread = max(valid) - min(valid) if len(valid) >= 2 else 0
marker = " <-- inconsistent" if spread > 0.5 else ""
print(f" | {spread:.2f}{marker}")
if __name__ == "__main__":
main()
```
</details>
Here are the results. The table compares how the font-generation
`autohint` flag affects the range of widths of various characters. Lower
`spread` mean that glyph stroke widths should appear more consistent.
```
Spread = max stem width - min stem width across glyphs (lower = more consistent):
┌──────────────┬──────┬─────────┬──────────┬──────────┐
│ Font │ Size │ Default │ Autohint │ Winner │
├──────────────┼──────┼─────────┼──────────┼──────────┤
│ Bookerly │ 12pt │ 1.49 │ 1.12 │ autohint │
├──────────────┼──────┼─────────┼──────────┼──────────┤
│ │ 14pt │ 1.39 │ 1.13 │ autohint │
├──────────────┼──────┼─────────┼──────────┼──────────┤
│ │ 16pt │ 1.38 │ 1.16 │ autohint │
├──────────────┼──────┼─────────┼──────────┼──────────┤
│ │ 18pt │ 1.90 │ 1.58 │ autohint │
├──────────────┼──────┼─────────┼──────────┼──────────┤
│ NotoSans │ 12pt │ 1.16 │ 0.94 │ mixed │
├──────────────┼──────┼─────────┼──────────┼──────────┤
│ │ 14pt │ 0.83 │ 1.14 │ default │
├──────────────┼──────┼─────────┼──────────┼──────────┤
│ │ 16pt │ 1.41 │ 1.51 │ default │
├──────────────┼──────┼─────────┼──────────┼──────────┤
│ │ 18pt │ 1.74 │ 1.63 │ mixed │
├──────────────┼──────┼─────────┼──────────┼──────────┤
│ OpenDyslexic │ 12pt │ 2.22 │ 1.44 │ autohint │
├──────────────┼──────┼─────────┼──────────┼──────────┤
│ │ 14pt │ 2.57 │ 3.29 │ default │
├──────────────┼──────┼─────────┼──────────┼──────────┤
│ │ 16pt │ 3.13 │ 2.60 │ autohint │
├──────────────┼──────┼─────────┼──────────┼──────────┤
│ │ 18pt │ 3.21 │ 3.23 │ ~tied │
├──────────────┼──────┼─────────┼──────────┼──────────┤
│ Ubuntu │ 12pt │ 1.25 │ 1.31 │ default │
├──────────────┼──────┼─────────┼──────────┼──────────┤
│ │ 14pt │ 1.41 │ 1.64 │ default │
├──────────────┼──────┼─────────┼──────────┼──────────┤
│ │ 16pt │ 2.21 │ 1.71 │ autohint │
├──────────────┼──────┼─────────┼──────────┼──────────┤
│ │ 18pt │ 1.80 │ 1.71 │ autohint │
└──────────────┴──────┴─────────┴──────────┴──────────┘
```
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? I used AI to make sure I'm
not doing something stupid, since I'm not a typography expert. I made
the changes though.
## Summary
**What is the goal of this PR?**
Consolidated repeated logic to fall back to REPLACEMENT_GLYPH.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
* Remove miniz and move completely to uzlib
* Move uzlib interfacing to InflateReader to better modularise inflation
code
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? Yes, Claude helped with
the extraction and refactor
## Summary
* This PR fixes decomposed diacritic handling end-to-end:
- Hyphenation: normalize common Latin base+combining sequences to
precomposed codepoints before Liang pattern matching, so decomposed
words hyphenate correctly
- Rendering: correct combining-mark placement logic so non-spacing marks
are attached to the preceding base glyph in normal and rotated text
rendering paths, with corresponding text-bounds consistency updates.
- Hyphenation around non breaking space variants have been fixed (and
extended)
- Hyphenation of terms that already included of hyphens were fixed to
include Liang pattern application (eg "US-Satellitensystem" was
*exclusively* broken at the existing hyphen)
## Additional Context
* Before
<img width="800" height="480" alt="2"
src="https://github.com/user-attachments/assets/b9c515c4-ab75-45cc-8b52-f4d86bce519d"
/>
* After
<img width="480" height="800" alt="fix1"
src="https://github.com/user-attachments/assets/4999f6a8-f51c-4c0a-b144-f153f77ddb57"
/>
<img width="800" height="480" alt="fix2"
src="https://github.com/user-attachments/assets/7355126b-80c7-441f-b390-4e0897ee3fb6"
/>
* Note 1: the hyphenation fix is not a 100% bullet proof implementation.
It adds composition of *common* base+combining sequences (e.g. O +
U+0308 -> Ö) during codepoint collection. A complete solution would
require implementing proper Unicode normalization (at least NFC,
possibly NFKC in specific cases) before hyphenation and rendering,
instead of hand-mapping a few combining marks. That was beyond the scope
of this fix.
* Note 2: the render fix should be universal and not limited to the
constraints outlined above: it properly x-centers the compund glyph over
the previous one, and it uses at least 1pt of visual distance in y.
Before:
<img width="478" height="167" alt="Image"
src="https://github.com/user-attachments/assets/f8db60d5-35b1-4477-96d0-5003b4e4a2a1"
/>
After:
<img width="479" height="180" alt="Image"
src="https://github.com/user-attachments/assets/1b48ef97-3a77-475a-8522-23f4aca8e904"
/>
* This should resolve the issues described in #998
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
## Summary
**What is the goal of this PR?**
`hasPrintableChars` does a pass over text before rendering. It looks up
glyphs in the font and measures dimensions, returning early if the text
results in zero size.
This additional pass doesn't offer any benefit over moving straight to
rendering the text, because the rendering loop already gracefully
handles missing glyphs. This change saves an extra pass over all
rendered text.
Note that both `hasPrintableChars` and `renderChar` replace missing
glyphs with `glyph = getGlyph(REPLACEMENT_GLYPH)`, so there's no
difference for characters which are not present in the font.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
jpirnay