## Summary
* **What is the goal of this PR?** Fixes#2402. On the X3, the "Time to
Sleep"
picker's 5-minute side buttons were inverted (left increased, right
decreased)
and the on-screen legend didn't match the physical buttons.
* **What changes are included?**
* Flip the large-step (±5 min) direction on X3 so the left side button
decreases and the right increases, matching the layout. X4 is unchanged.
* Add a device-specific step-hint string
(`STR_SLEEP_TIMER_STEP_HINT_X3`)
selected via `gpio.deviceIsX3()`. X3 shows `+/-: 1 min Side buttons: 5
min`;
X4 keeps the original `Left/Right: 1 min Up/Down: 5 min`.
* Same fix applied to both slider pickers that read the raw up/down side
buttons: the Time-to-Sleep picker and the "Go to %" picker
(`EpubReaderPercentSelectionActivity`), each with its own X3 hint string
(`STR_SLEEP_TIMER_STEP_HINT_X3`, `STR_PERCENT_STEP_HINT_X3`).
## Additional Context
* **Root cause:** the X3's side buttons sit one on each edge of the
screen
(power on top), whereas the X4 has a vertical up/down rocker on the
right
edge. So `BTN_UP` is physically the *left* button on X3 but the *top*
button
on X4. The picker mapped up→+5 / down→−5 unconditionally, which reads
naturally on the X4 rocker but inverted on the X3's left/right buttons.
The
static legend ("Up/Down: 5 min") had the same X3-only mismatch.
* The codebase already detects the device at runtime and handles this
layout
difference elsewhere (e.g. `LyraTheme::drawSideButtonHints` draws "Up on
left,
Down on right" for X3), so this reuses the same `gpio.deviceIsX3()`
signal.
* Swept the codebase for other side-button sliders:
`ClockOffsetActivity` already
uses the `Next/Previous` (`ButtonNavigator`) abstraction, which resolves
to
left=decrement / right=increment on X3, so it needs no change. List/page
navigation (Wi-Fi, KOReader sync, BMP viewer) and the keyboard cursor
are also
unaffected. The two slider pickers above were the only ones using raw
up/down.
* **X4 is untouched** — same direction, same legend wording as before.
* **Tested on X3 hardware:** left side button now decreases, right
increases, and
the legend matches. X4 not yet tested on device (no unit on hand); its
behaviour and strings are unchanged from master.
* **Translations:** the new `STR_SLEEP_TIMER_STEP_HINT_X3` and
`STR_PERCENT_STEP_HINT_X3` were added to all 26 languages, but the
non-English
ones are AI-generated and would benefit from a native-speaker pass —
particularly Hebrew (RTL ordering with a leading `+/-`), Kazakh, and
Vietnamese.
---
### AI Usage
Did you use AI tools to help write this code? _**YES**_
---------
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
## Summary
fix#2414
### Root Cause
`updateBookmarkFlag()` was introduced in commit 1db1442 and is executed
on every render (every page turn). The function calls:
`ProgressMapper::toSavedProgress()`
→ `ChapterXPathResolver::findXPathForProgress()`
This path decompresses the current EPUB section content twice:
1. To count visible characters.
2. To resolve the corresponding XPath.
For larger sections (e.g. ~133 KB decompressed content), this adds
approximately **1 second of I/O overhead per page turn**, with the cost
increasing as chapter size grows.
### Fix
`updateBookmarkFlag()` only needs to determine whether a bookmark falls
within the currently displayed page range.
The required information is already available during rendering:
* `currentPage`
* `section->pageCount`
* `currentSpineIndex`
Instead of converting the current location to a saved progress object
(and resolving an XPath), the implementation now computes the current
page's progress range directly and compares bookmark percentages against
that range.
This is effectively the same percentage-based matching logic already
used as a fallback in `bookmarkMatchesProgress()` when XPath matching is
unavailable.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< PARTIALLY >**_
(#2334)
Introduces a new display method that prepares the framebuffer as a base
frame for grayscale overlays. On X3 panels, this uses the OEM
differential base waveform (AA-pre-BW) without forcing a resync. Other
panels fall back to normal display with configurable refresh mode.
Dependent upon matching SDK commit to work
## Summary
This PR enhances the EPUB reader's bookmark system with two
complementary improvements: a per-page bookmark indicator icon and
toggle behavior on the existing long-press action.
---
### What Changed
**Bookmark Toggle (was: add-only)**
The long-press Confirm action now toggles bookmarks rather than always
adding. `addBookmark()` checks whether a bookmark with the same xpath
already exists in the in-memory cache:
- If found → removes it and shows "Bookmark removed."
- If not found → adds it and shows "Bookmark added."
A new `STR_BOOKMARK_REMOVED` translation string was added to support the
removal message.
**Bookmark Icon Indicator**
A `BookmarkIcon` is now drawn at the top-right corner of the page
whenever the current page has a bookmark. `updateBookmarkFlag()` is
called at render time to determine whether the current page is
bookmarked.
**In-Memory Bookmark Cache**
Bookmarks are now loaded into `cachedBookmarks` on `onEnter()` rather
than being re-read from disk on every toggle. All subsequent add/remove
operations work against this cache and flush to disk, avoiding redundant
file reads on each bookmark action.
**Faster bookmarks list**
Previously, calculating "page X/Y" for each entry required decompressing
the entire spine item. We now persist `si`/`pc`/`pp` (spine index, page
count, and page progress) in the bookmark JSON when saving, and restore
them when loading. This avoids the expensive `toCrossPoint()` loop in
`onEnter()`, significantly reducing the cost of initializing the
bookmarks list.
---
### Files Changed
- `EpubReaderActivity.cpp` — `addBookmark()` toggle logic,
`updateBookmarkFlag()` (new), icon rendering in `renderContents()`,
cache initialization in `onEnter()`
- `EpubReaderActivity.h` — new fields: `currentPageBookmarked`,
`bookmarkRemoved`, `cachedBookmarks`; new method declaration
`updateBookmarkFlag()`
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< PARTIALLY >**_
---------
Co-authored-by: Julia Nguyen <julia@uxj.io>
## Summary
* **What is the goal of this PR?**
* Make manual clock sync work even when the device is not already
connected to Wi-Fi, so the user can start the sync flow directly from
settings instead of being blocked by connection state.
* **What changes are included?**
* `ClockSyncActivity` now launches the normal Wi-Fi selection flow
before syncing when the device is offline.
* After Wi-Fi selection succeeds, clock sync resumes automatically and
performs the existing forced NTP sync.
* If clock sync had to bring Wi-Fi up, the activity disconnects and uses
the existing silent restart cleanup path to avoid leaving the device in
a fragmented post-Wi-Fi heap state.
* The completion UI now only advertises Back, matching the updated input
handling.
## Additional Context
* Existing behavior is unchanged when Wi-Fi is already connected: the
activity syncs immediately.
* Cancelling Wi-Fi selection exits the clock sync flow.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< YES >**_
## Summary
* Adds a live font preview pane to the font selection screen so users
can see how a font looks before committing to it.
* Changes
* A preview pane occupying the top 30% of the font selection screen,
rendering sample pangram text in the previewed font
* A two-step confirm flow: first press (enter button) previews the font,
second press selects it
* Back restores the original font settings, so browsing has no side
effects
* Layout dimensions cached in `onEnter()` to avoid redundant
recalculation between `loop()` and `render()`
## Additional Context
* Preview sample text is hardcoded English; didn't want to use AI for
translation as I would not be able to verify the output in most
languages...
* The preview pane reduces visible list height; this is compensated by
passing the reserved height into `getNumberOfItemsPerPage`
---
### AI Usage
Did you use AI tools to help write this code? **PARTIALLY**
AI use for assisting in coding and in writing the PR description.
## Summary
* **What is the goal of this PR?**
Fixes#2275. A book could get stuck reopening on an old page, with
progress no
longer saving and neither "Delete Book Cache" nor "Clear Reading Cache"
able to
fix it. Root cause: `progress.bin` was written truncate-in-place, so an
interrupted write (power loss, or a crash mid-SPI during sleep) left it
with a
broken FAT cluster chain that the firmware could neither rewrite nor
delete —
recovery required `fsck`/manual deletion on a host PC.
Confirmed in the SDK: `SDCardManager::openFileForWrite` opens with
`O_RDWR | O_CREAT | O_TRUNC`, so the canonical file is zeroed before the
few
progress bytes are rewritten — exactly the window that corrupts the FAT
chain.
* **What changes are included?**
* New shared helper `ProgressFile::writeAtomic()`
(`src/activities/reader/ProgressFile.h`): writes progress to
`progress.bin.tmp`, flushes and closes it, then `remove`s the old
`progress.bin` and `rename`s the temp into place. An interrupted write
now
only ever damages the throwaway temp; the canonical file is never torn.
* All three readers route their progress saves through the helper:
EPUB (`EpubReaderUtils.h`), `TxtReaderActivity`, `XtcReaderActivity` —
they
all shared the identical vulnerable pattern.
* Minor: `EpubReaderUtils::saveProgress` now takes `const Epub&` (clears
a
cppcheck `constParameterReference` finding).
## Additional Context
* **Crash-safe, not metadata-atomic.** On FAT the replace is `remove` +
`rename`
(two directory ops; SdFat's `rename` won't overwrite, hence
remove-first). A
crash between them leaves *neither* file, which reads as "no saved
progress" on
next launch — a harmless reset to an old page, never a
corrupt/unclearable file.
The guarantee is that `progress.bin` is never half-written.
* **Prevents, does not repair.** This stops new corruption on healthy
cards. It
cannot fix an already-corrupted `progress.bin` (removing it may itself
fail at
the FAT level) — those still need `fsck`/manual deletion, as in the
issue's
workaround.
* **Known follow-up (out of scope here):** a crash *while writing the
temp* can
leave an orphan `progress.bin.tmp`. It's harmless and self-healing (the
next
save overwrites it, and it never blocks reading progress), but a
boot-time
orphan-`.tmp` cleanup would be a tidy follow-up.
* **Focus areas for review:** the close-before-rename ordering in
`ProgressFile.h` and the remove-before-rename rationale.
## Verification
* `./bin/clang-format-fix` — clean
* `pio check --fail-on-defect low --fail-on-defect medium
--fail-on-defect high` — no defects
* `pio run` — SUCCESS (RAM 30.9%, Flash 78.8%; footprint essentially
unchanged)
* Tested on a **Xteink X4** device: open book, turn pages, sleep/exit,
reopen —
progress now restores to the navigated page across all three readers
(EPUB / TXT / XTC).
---
### AI Usage
Did you use AI tools to help write this code? _**YES**_
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
## Summary
- Hold the menu (Confirm) button for ≥1s while reading an EPUB to launch
the existing `KOReaderSyncActivity` directly — replaces the three-step
path (open reader menu → scroll to Sync → confirm) with a single
gesture.
- Reuses `ReaderUtils::GO_HOME_MS` (same 1s threshold used by long-press
Back) and the existing `KOREADER_STORE.hasCredentials()` guard.
- Adds a Controls picker **"Long-press Menu"** (`longPressMenuFunction`,
default **Bookmark**) that **cycles through the available functions**
bound to the long-press gesture: `KOSync → Disabled → Bookmark`. The
field name and `LONG_PRESS_MENU_FUNCTION` enum are intentionally general
so future actions (dictionary lookup, table of contents, etc.) can be
appended without another schema migration. The setting is **not** a
binary toggle.
- Existing menu Sync entry still works — both call sites share one
extracted helper (`launchKOReaderSync`); no logic duplication.
- Short-press Confirm release is gated on duration so the reader menu
does not also open after a long press that *acts*, mirroring the
existing long-press Back pattern.
- **No-credentials fall-through:** `launchKOReaderSync()` now returns
whether it acted. When the function is set to KOSync but no KOReader
credentials are stored, the long-press is a no-op that **falls through
to open the reader menu** — so the menu stays reachable instead of the
hold silently swallowing the gesture. The release is only suppressed
when sync actually launched or surfaced a save error.
## Test plan
- [x] `pio run` succeeds clean for the `default` ESP32-C3 environment.
- [x] On-device, value **KOSync**, valid KOReader credentials:
long-press Confirm ≥1s → sync screen launches; get + update progress
return HTTP 200; release does **not** also open the reader menu; returns
to the same page.
- [x] On-device, value **KOSync**, **no** credentials: long-press
Confirm falls through and **opens the reader menu** (regression fix);
short-press also opens the menu.
- [x] On-device: menu → Sync still launches the same screen (shared
helper) and syncs (200/200).
- [x] On-device, value **Bookmark**: long-press drops a bookmark and
does **not** also open the menu.
- [x] On-device, value **Disabled**: long-press Confirm opens the menu
on release; no sync, no bookmark.
- [x] On-device: long-press Back still goes to the file browser
(unchanged path).
- [x] Heap: epub is released before the TLS handshake (frees ~16 KB);
min free heap stayed ~84 KB during sync, well above the safe floor. No
panics/OOM across the session.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
---------
Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
## Summary
`std::map` heap-allocates each node. Avoid using it for wifi SSID
dedupe, and instead just dedupe in-place with the existing `networks`
vector. Removed dead `ipAddress` member in `WifiNetworkInfo` struct.
---
### AI Usage
Did you use AI tools to help write this code? _**PARTIALLY**_
## Summary
* Fix the issue described in #2176 where bookmark percentages are always
0%
* Also fixed the page number rendering to +1 because they are 0 index
based, but should be rendered starting from 1
---
### AI Usage
Did you use AI tools to help write this code? _**< NO >**_
## Summary
* **What is the goal of this PR?**
Mainly fixes#2196, but also allows users to set a sleep time of 1~30
min or to never sleep.
* **What changes are included?**
1. Revert changes from #1948 and #2137 (Sorry @Uri-Tauber)
2. Cherrypick changes from
https://github.com/uxjulia/CrossInk/commit/0cb91c3dd1c63f0559d4392fadc4a8340af5bdde
and
https://github.com/uxjulia/CrossInk/commit/4e6bd634b6ede51ff1a7107ba3e8efcd152bc6ee
for a timeout interval picker UI, the custom sleep time feature, and
migrate the existing setting in v1.3.0, `sleepTimeout`, to
`sleepTimeoutMinutes` (Thanks! @uxjulia)
3. Add a "Never" at the far right of the timeout interval picker
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
---------
Co-authored-by: Julia <julia@uxj.io>
## Summary
* **What is the goal of this PR?**
Improve the X3 clock UTC offset picker so it is clearer which part of
the offset will change when the user presses up/down.
* **What changes are included?**
Replaces the single underlined `UTC +/- H:MM` string with separate
editable fields for the sign, hour, and minutes.
The editable fields are spaced out, outlined, and the currently selected
field is highlighted with a light gray background.
## Additional Context
* This is a render-only UI change in `ClockOffsetActivity`; it does not
change how UTC offsets are stored, clamped, saved, or applied.
* The selected field still cycles with Confirm, and up/down still
adjusts the active sign/hour/minute value.
Screenshot of **current design** showing the sign (+/-) highlighted:
<img width="264" height="396" alt="old utc offset"
src="https://github.com/user-attachments/assets/c88d69ea-089c-47da-b5b3-ed0ebda5b112"
/>
Screenshot of **new design** showing the sign (+/-) highlighted:
<img width="264" height="396" alt="utc offset fix"
src="https://github.com/user-attachments/assets/f51da8b3-9aab-4f48-a9d1-21c828c01499"
/>
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< YES >**_
Chapter selection previously only used the spine index, causing
navigation to always land on page 0 of the spine item. Sub-chapters that
share a spine file but differ by anchor (e.g. `chapter.xhtml#sec2`) were
silently ignored. Now the TOC anchor is passed through `ChapterResult`
and applied via the existing `pendingAnchor` mechanism.
## Summary
* This PR implements navigation to sub-chapters which didn't work
correctly previously. If a sub-chapter of the current top-level chapter
was selected, nothing happened. If a sub-chapter of another top-level
chapter was selected, reader switched to the beginning of the top-level
chapter.
* In addition, chapters now always start from a new page. This fixes
anchor to page calculation for the cases when the actual chapter content
doesn't fit on the page where the corresponding ToC anchor was found.
## Additional Context
* I might misuse `pendingAnchor` here which was previously used for
footnote navigation, please double check. I'm open to suggestions for
improvements.
* Note that the chapter selected by default when
`EpubReaderChapterSelectionActivity` opens is still wrong. I'm going to
fix this separately. This PR addresses only navigation to the selected
chapter.
* I tested this PR on my X4 and verified that navigation to a different
sub-chapter works correctly, both inside and outside the current spine.
* Some of the changes were borrowed from
https://github.com/crosspoint-reader/crosspoint-reader/pull/1455
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Tiled grayscale rendering to drop the storeBwBuffer peak largest
contiguous free block (the value that actually drives OOM on the C3)
from ~114 KB to ~82-90 KB.
This renders each grayscale plane band-by-band into a small (~8 KB)
scratch and
streams each band straight to controller RAM (community-sdk
writeGrayscalePlaneStrip), leaving the BW framebuffer intact. No save,
no
restore; controller RAM is re-synced for the next differential turn
directly
from the live framebuffer.
Three writers honor the active band target so per-band re-rendering
stays cheap
and correct:
- drawPixel (text) redirects writes to the band scratch and clips to it.
- renderCharImpl skips glyphs whose physical y-extent is outside the
band before
the bitmap decode (glyphIntersectsStrip), so the per-band re-render
doesn't
pay N x glyph decode.
- DirectPixelWriter (images) writes the band scratch via getWriteTarget
instead
of the framebuffer. Without this, image pixels wrote the live BW frame
directly and cleanup re-synced that corruption, leaving thin outlines
after
navigating away from an image.
Controller specifics live in the SDK (X4 setRamArea windowing, X3 PTL);
the
reader checks supportsStripGrayscale() and is otherwise
controller-agnostic.
Measured on hardware (X4 and X3, text and images, visually correct):
- Grayscale scratch ~8 KB vs ~50 KB save; largest contiguous free block
held at
full size during grayscale instead of dropping ~25-32 KB.
- X4 text page about +25 ms/page; X3 page time is dominated by its
intrinsic
grayscale refresh, not tiling.
Depends on community-sdk #13 (the writeGrayscalePlaneStrip API). The
submodule
bump here points at that branch, so until #13 merges the submodule won't
resolve
from upstream and CI will fail there; keeping this a draft until then.
Will
rebase onto master and re-point the submodule to the merged SDK commit
once #13
lands.
Did you use AI tools to help write this code? partial
Based on the learnings from
https://github.com/crosspoint-reader/crosspoint-reader/pull/2074 , I
wanted to bring the same buffer savings to the rest of our HTTP Client
stack. That being said, HttpDownloader (fonts/OPDS) used the Arduino
HTTPClient.
HttpDownloader was the last consumer of the Arduino HTTPClient +
NetworkClientSecure stack. OtaUpdater already runs on esp_http_client,
so this drops the parallel HTTP/TLS implementation. It also fixes a
class of OPDS/font download failures: HTTPClient's setTimeout is uint16
and truncates, and its short per-read deadline killed slow or chunked
responses (the -11 / incomplete-data errors).
What changed:
- Rewrote fetchUrl/downloadToFile around esp_http_client with a
streaming open() -> fetch_headers() -> read() loop, manual redirect
following, and is_complete_data_received() as the completeness gate.
Body bytes go straight to the sink (OPDS parser stream, std::string, or
file), so nothing buffers the payload.
- HTTPS is now verified against the CA bundle instead of
NetworkClientSecure::setInsecure(). esp-tls is built with
CONFIG_ESP_TLS_INSECURE off, so an unverified handshake can't be set up
anyway; the model is public servers over verified https and local
servers over plain http (transport is chosen from the URL scheme).
** Self-signed https servers are no longer supported, by design. **
- timeout_ms is 60s; esp_http_client's timeout is uint32, so unlike
HTTPClient it doesn't silently truncate.
- HTTP buffers are 4096 (rx) / 1024 (tx). 4096 holds real OPDS server
headers; the GitHub release CDN sends more and logs a non-fatal
truncation warning, but the headers we read (Location, Content-Length)
come first and survive.
- Removed the now-unused UrlUtils::isHttpsUrl and a stale HTTPClient
comment in FontDownloadActivity.
Validated on device: OPDS browse and a 3.4 MB book download over
verified https, GitHub font downloads (crc-checked), redirect handling
matching curl, and slow/erroring servers surfaced correctly.
Did you use AI tools to help write this code? partial
## Summary
### **What is the goal of this PR?**
This fixes an unintended settings side effect when cycling the `Sleep
Screen` option through `Quick Resume`.
Previously, selecting `Sleep Screen = Quick Resume` globally forced
`Quick Resume on Timeout = ON` and left it enabled even after the user
toggled `Sleep Screen` to another option within the same settings
session. Now the auto-enable behavior is scoped to the Settings screen
session:
- If `Quick Resume on Timeout` was already `ON` when entering Settings,
it stays `ON`.
- If it was `OFF`, selecting `Sleep Screen = Quick Resume` temporarily
turns it `ON`.
- If the user then switches away from `Quick Resume`, it turns back
`OFF`.
### **What changes are included?**
- Removes the global logic that permanently forced `Quick Resume on
Timeout` to `ON` whenever `Sleep Screen` was set to `Quick Resume`, even
if it was just due to toggling through the options.
- Adds Settings-screen session tracking so `Quick Resume on Timeout` is
only auto-enabled while the user has `Sleep Screen = Quick Resume`.
- Restores `Quick Resume on Timeout` back to `OFF` when the user
switches away, but only if it was `OFF` when they entered Settings.
- Preserves existing `ON` timeout preferences.
- Same behavior applies to the web settings
## Additional Context
- Tested this on device and via the settings UI
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it helps set the right
context for reviewers.
Did you use AI tools to help write this code? _**< YES >**_
## Summary
**What is the goal of this PR?**
Adds a clearer Quick Resume sleep-screen flow. The previous “Page as
Sleep Screen” behavior is now exposed as a dedicated `Sleep Screen >
Quick Resume `option, with the timeout-only behavior controlled by a
renamed `Quick Resume on Timeout `setting.
**What changes are included?**
- Adds `Quick Resume` as a new `Sleep Screen` option.
- Renames the old `Page as Sleep Screen` setting to `Quick Resume on
Timeout`.
- Changes that setting’s choices from `Never / After Timeout / Always`
to `OFF / ON`.
- Makes `Quick Resume on Timeout = ON` equivalent to the old `After
Timeout` behavior.
- Makes `Sleep Screen > Quick Resume` equivalent to the old `Always`
behavior.
- Automatically forces `Quick Resume on Timeout` to `ON` when `Sleep
Screen` is set to `Quick Resume`.
- Renames internal setting references from `seamlessSleepScreen` to
`quickResumeSleepScreen`.
- Updates translations for the renamed setting label.
**Additional Context**
- This is mostly a settings/labeling restructure around existing
behavior, not a new rendering path.
- The runtime quick-resume behavior still uses the existing saved
framebuffer / last-screen sleep flow.
- Review focus areas:
- Sleep entry behavior from manual sleep vs timeout sleep.
- The automatic dependency where selecting `Sleep Screen > Quick Resume`
sets `Quick Resume on Timeout` to `ON`.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< YES >**_
---
**New `Quick Resume` option for `Sleep Screen` will automatically set
`Quick Resume on Timeout` to `ON`**:
<img width="480" height="800" alt="quick resume"
src="https://github.com/user-attachments/assets/94c553fd-a122-47a8-add9-f29694f55566"
/>
**Example where a different sleep screen setting like `Cover` can be
used in combination with the `Quick Resume on Timeout` setting**:
<img width="480" height="800" alt="cover + quick resume"
src="https://github.com/user-attachments/assets/dd18ce18-230b-4b78-808b-ac85f5e7d5d8"
/>
Matthías Páll Gissurarson