## Summary
* **What is the goal of this PR?**
Replace the pixel-by-pixel `fillRectDither` implementation with a new
byte-aligned `fillRectImpl` that eliminates per-pixel
`rotateCoordinates` calls and Read-Modify-Write bitwise loops, yielding
a significant rendering speedup on ESP32 E-ink framebuffers.
Ported from @rhythmerc's crosspoint-reader fork commit 27ea625.
* **What changes are included?**
- **`GfxRenderer.cpp` — `fillRectDither` refactor:** The existing
`if/else if` chain is replaced with a `switch` statement that delegates
each `Color` case to the new `fillRectImpl<Color>()` template,
eliminating runtime branching.
- **`GfxRenderer.cpp` — new `fillRectImpl<C>()` template:** Core of the
optimization. Key behaviors:
- Clips the rectangle in logical space upfront.
- Rotates only **2 opposing corner points** (top-left and bottom-right)
into physical framebuffer space instead of rotating every pixel
individually.
- Derives physical-space `byteStart`/`byteEnd` and precomputes
`headMask` / `tailMask` for MSB-first partial-byte boundaries,
performing RMW only on the edge bytes.
- **Solid fills (`Black` / `White`):** Uses `memset` for all interior
full-byte runs per row — no per-pixel writes.
- **Dithered fills (`LightGray` / `DarkGray`):** Precomputes both parity
variants of `blackMask` (even/odd `py`) **outside** the row loop,
eliminating the previously re-evaluated 8-bit construction loop on every
physical row. Interior full bytes are then written with a single
`memset(whiteMask)`.
- Uses `if constexpr` throughout to dispatch on `Color` at compile time,
generating zero runtime branches per template instantiation.
- **`GfxRenderer.h`:** Declares the new private `fillRectImpl<Color>()`
template method with an explanatory doc-comment.
- **Explicit template instantiations** added for all four active `Color`
variants (`Black`, `White`, `LightGray`, `DarkGray`).
## Additional Context
* **Performance:** The primary motivation is ESP32 E-ink framebuffer
performance. The old path called `rotateCoordinates` and did a full RMW
for every single pixel in the rectangle. The new path calls
`rotateCoordinates` exactly **twice** per fill regardless of rectangle
size, then operates at byte granularity — a complexity reduction from
O(W×H) coordinate transforms to O(1).
* **Dither correctness:** The `blackMask` precomputation relies on the
dither pattern having period 2 in both logical X and Y, which makes the
per-row byte pattern repeat with period 2 in `py`. Reviewers should
verify the `lxBase`/`lyBase` derivations for all four orientations
(`Portrait`, `PortraitInverted`, `LandscapeClockwise`,
`LandscapeCounterClockwise`) match the inverse of `rotateCoordinates`.
* **Edge case — single-byte rows:** When `byteStart == byteEnd`, the
head and tail masks are ANDed together into a single `rectMask` to avoid
double-masking the same byte. This path should be tested with narrow
rectangles (width < 8px).
* **No behavioral change for `Color::Clear`:** The `Clear` case exits
early via `if constexpr` and is a no-op, matching the original behavior.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< YES >**_
---------
Co-authored-by: Ryan Mercado <rmercado@firstdollar.com>
Force display resync on X3 when HALF refresh is requested to clear prior content before rendering. Add grayscale preconditioning for X3's UC81xx controller to even out single-pixel dithering artifacts that appear as speckle with its turbo BW waveform.
## Summary
* **What is the goal of this PR?**
* Fix the “Inverted” translation so reader orientation and color/filter
inversion can use separate labels.
* **What changes are included?**
* Adds `STR_ORIENTATION_INVERTED` for the inverted portrait orientation
option.
* Updates the reader orientation setting to use
`STR_ORIENTATION_INVERTED` instead of reusing `STR_INVERTED`.
* Leaves `STR_INVERTED` for the sleep cover filter and tilt page-turn
mode
* Adds the new orientation string across all 26 locale YAML files.
## Additional Context
* The original issue was found by a user in German, where `STR_INVERTED`
was translated as `Hochformat 180°`, which made sense for orientation
but not for color filters.
* This is a UI-label-only change. It does not change persisted
orientation values or settings behavior.
* Reviewer note: non-English wording may still benefit from
native-speaker review, especially for the new orientation-specific
labels and to verify the interchangeable usage between inverted color
and inverted tilt page turn direction.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< YES >**_
(#2334)
Introduces a new display method that prepares the framebuffer as a base
frame for grayscale overlays. On X3 panels, this uses the OEM
differential base waveform (AA-pre-BW) without forcing a resync. Other
panels fall back to normal display with configurable refresh mode.
Dependent upon matching SDK commit to work
## Summary
This PR enhances the EPUB reader's bookmark system with two
complementary improvements: a per-page bookmark indicator icon and
toggle behavior on the existing long-press action.
---
### What Changed
**Bookmark Toggle (was: add-only)**
The long-press Confirm action now toggles bookmarks rather than always
adding. `addBookmark()` checks whether a bookmark with the same xpath
already exists in the in-memory cache:
- If found → removes it and shows "Bookmark removed."
- If not found → adds it and shows "Bookmark added."
A new `STR_BOOKMARK_REMOVED` translation string was added to support the
removal message.
**Bookmark Icon Indicator**
A `BookmarkIcon` is now drawn at the top-right corner of the page
whenever the current page has a bookmark. `updateBookmarkFlag()` is
called at render time to determine whether the current page is
bookmarked.
**In-Memory Bookmark Cache**
Bookmarks are now loaded into `cachedBookmarks` on `onEnter()` rather
than being re-read from disk on every toggle. All subsequent add/remove
operations work against this cache and flush to disk, avoiding redundant
file reads on each bookmark action.
**Faster bookmarks list**
Previously, calculating "page X/Y" for each entry required decompressing
the entire spine item. We now persist `si`/`pc`/`pp` (spine index, page
count, and page progress) in the bookmark JSON when saving, and restore
them when loading. This avoids the expensive `toCrossPoint()` loop in
`onEnter()`, significantly reducing the cost of initializing the
bookmarks list.
---
### Files Changed
- `EpubReaderActivity.cpp` — `addBookmark()` toggle logic,
`updateBookmarkFlag()` (new), icon rendering in `renderContents()`,
cache initialization in `onEnter()`
- `EpubReaderActivity.h` — new fields: `currentPageBookmarked`,
`bookmarkRemoved`, `cachedBookmarks`; new method declaration
`updateBookmarkFlag()`
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< PARTIALLY >**_
---------
Co-authored-by: Julia Nguyen <julia@uxj.io>
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
Fixes footnote links landing in start section instead of the specific
foot note target.
* **What changes are included?**
ChapterHtmlSlimParser.cpp: call flushPendingAnchor() before overwriting
pendingAnchorId. First id got lost due to consecutive non-block elements
carry ids, the first id was lost and the reader had no page to jump to,
so it defaulted to page 0.
## Additional Context
Tested with the epubs attached to to #2336. Need to clear .crosspoint/
cache after flashing so the anchor map gets rebuilt with the fix.
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code?
Partially assisted with writing documentation.
Sync the runtime board profile to the detected device before I2C consumers initialize. This ensures Wire.begin() is called when needed for X3 devices. Previously, the X4 profile remained active through initialization, causing Wire to never reinitialize after detection probe, leading to X3 I2C read failures with 'could not acquire lock' errors.
Touch held time was being lost when gestures were detected because the gesture detection happens before the touch release event. Now remembers the held time at the moment of gesture detection and returns it within a 250ms window, allowing UI elements to properly respond to long-press gestures. Also refactors deep sleep code to use PowerManager methods.
Replace hardcoded UART0_RXD pin with configurable BoardConfig::ACTIVE.usbDetect. Also simplify wakeup reason detection logic to prioritize GPIO/EXT1 wakeup from deep sleep as PowerButton event.
Draws a small additional bar segment when progress reaches 95% or higher, positioned at x+14 within the progress bar cavity. The extra bar is capped at 3 pixels wide to fit within the available space.
Integrate SDK-based RTC and IMU backends as alternatives to direct hardware access. HalClock now attempts SDK RTC initialization and caches time values for reliability. HalTiltSensor adds SDK IMU backend with fallback logic. ClockOffsetActivity gains touch and swipe gesture support for field navigation.
Implements bottom-edge swipe-up gesture detection and delayed touch-select with tracking state. Adds isTouchTapCandidate() to distinguish taps from swipes. Includes LilyGo T5 S3 board configuration with USB CDC logging transport for boards where Serial operator bool reports false incorrectly.
## Summary
* Adds a live font preview pane to the font selection screen so users
can see how a font looks before committing to it.
* Changes
* A preview pane occupying the top 30% of the font selection screen,
rendering sample pangram text in the previewed font
* A two-step confirm flow: first press (enter button) previews the font,
second press selects it
* Back restores the original font settings, so browsing has no side
effects
* Layout dimensions cached in `onEnter()` to avoid redundant
recalculation between `loop()` and `render()`
## Additional Context
* Preview sample text is hardcoded English; didn't want to use AI for
translation as I would not be able to verify the output in most
languages...
* The preview pane reduces visible list height; this is compensated by
passing the reserved height into `getNumberOfItemsPerPage`
---
### AI Usage
Did you use AI tools to help write this code? **PARTIALLY**
AI use for assisting in coding and in writing the PR description.
## Summary
- Hold the menu (Confirm) button for ≥1s while reading an EPUB to launch
the existing `KOReaderSyncActivity` directly — replaces the three-step
path (open reader menu → scroll to Sync → confirm) with a single
gesture.
- Reuses `ReaderUtils::GO_HOME_MS` (same 1s threshold used by long-press
Back) and the existing `KOREADER_STORE.hasCredentials()` guard.
- Adds a Controls picker **"Long-press Menu"** (`longPressMenuFunction`,
default **Bookmark**) that **cycles through the available functions**
bound to the long-press gesture: `KOSync → Disabled → Bookmark`. The
field name and `LONG_PRESS_MENU_FUNCTION` enum are intentionally general
so future actions (dictionary lookup, table of contents, etc.) can be
appended without another schema migration. The setting is **not** a
binary toggle.
- Existing menu Sync entry still works — both call sites share one
extracted helper (`launchKOReaderSync`); no logic duplication.
- Short-press Confirm release is gated on duration so the reader menu
does not also open after a long press that *acts*, mirroring the
existing long-press Back pattern.
- **No-credentials fall-through:** `launchKOReaderSync()` now returns
whether it acted. When the function is set to KOSync but no KOReader
credentials are stored, the long-press is a no-op that **falls through
to open the reader menu** — so the menu stays reachable instead of the
hold silently swallowing the gesture. The release is only suppressed
when sync actually launched or surfaced a save error.
## Test plan
- [x] `pio run` succeeds clean for the `default` ESP32-C3 environment.
- [x] On-device, value **KOSync**, valid KOReader credentials:
long-press Confirm ≥1s → sync screen launches; get + update progress
return HTTP 200; release does **not** also open the reader menu; returns
to the same page.
- [x] On-device, value **KOSync**, **no** credentials: long-press
Confirm falls through and **opens the reader menu** (regression fix);
short-press also opens the menu.
- [x] On-device: menu → Sync still launches the same screen (shared
helper) and syncs (200/200).
- [x] On-device, value **Bookmark**: long-press drops a bookmark and
does **not** also open the menu.
- [x] On-device, value **Disabled**: long-press Confirm opens the menu
on release; no sync, no bookmark.
- [x] On-device: long-press Back still goes to the file browser
(unchanged path).
- [x] Heap: epub is released before the TLS handshake (frees ~16 KB);
min free heap stayed ~84 KB during sync, well above the safe floor. No
panics/OOM across the session.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
---------
Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Refactor UI font generation to support different rendering modes based on size. Small UI fonts (12pt) use 1-bit rendering for crisp display and reduced flash usage. Large UI fonts (14pt) now use 2-bit compressed rendering to stay smooth when scaled up on touch/high-density boards. Extract font generation logic into reusable generate_ui_font() function.
Removed the getFontXHeight method from GfxRenderer interface. Updated documentation to clarify that getFontCapHeight returns the 'H' glyph height for optical alignment, and improved the comment for getTextVisualCenterOffset to be more concise.
Implement orientation-aware icon rendering using freeink::Icon format that applies rotation transforms per-pixel. Add wasListScroll helper for touch-based list navigation with swipe gestures. Switch vertical centering from x-height to cap-height for better visual alignment with capital-led UI labels.
Introduces uiScale() method to apply per-board UI scaling based on device type (1.0 for button devices, >1 for touch devices to make UI elements finger-sized). Adds scaledMetrics member to store scaled theme metrics that are returned by getMetrics().
Simplify and clarify documentation for touch gesture detection (back gesture, item taps, long-press) and board detection flags. No functional changes, just improved comment readability.
Implements tap zones on touch devices for page back/forward navigation and press-and-hold actions, mirroring physical button behavior. Adds isXteinkDevice() helper to distinguish Xteink X3/X4 boards from touch devices. The sunlight fading fix setting is now exclusive to Xteink devices, while touch devices get the new touch reader controls toggle instead.
Implement touch-down event detection to provide immediate visual feedback when touching list items, mirroring button navigation behavior. Add long-press detection (500ms threshold) to distinguish between tap and hold gestures. Apply touch-down selection updates to file browser, home menu, and recent books activities.
Implements tapToLogical() to convert normalized touch coordinates to orientation-aware logical screen coordinates. Adds TouchRegistry hit testing for interactive UI elements and header back button. Touch gestures now work correctly across all screen orientations (Portrait, Landscape, etc.) by inverting the rotateCoordinates transform.
Add dynamic I2C bus selection for battery gauge to support boards with multiple I2C controllers (e.g., Sticky uses Wire1 to avoid conflicts with GT911 touch). Fix logging on ESP32-S3 USB-Serial-JTAG by using esp_rom_printf instead of Serial, which incorrectly reports disconnected state.
Replace hardcoded X3-specific I2C pins and frequencies with values from the active board profile. Add support for boards with I2C fuel gauges (X3, LilyGo, Sticky) and ADC-based battery sensing (X4, M5Paper). Skip ADC setup when batteryAdc is unassigned to prevent GPIO mux faults.
Prevent I2C pin collision on S3/ESP32 boards by skipping the X3/X4 fingerprint probe. The probe's I2C pins (GPIO20/0) conflict with onboard peripherals like the BQ27220 gauge and reconfigure strapping pins. Force deviceType to X4 for non-C3 builds.
Change SPI pre-claim logic to only apply on C3/Xteink hardware where EPD_* pins are hardcoded. Other boards (M5Paper, Sticky) need to initialize SPI from BoardConfig::ACTIVE pins to avoid incorrect pin assignments for display and SD card.
Justin Mitchell