## Improvements
* Moved the File Manager breadcrumb into the Contents card header for a
cleaner, more consistent interface.
* Updated the Wireless Transfer section of the User Guide with clearer
instructions.
* Battery status bar indicator no longer changes position when adding or
removing bookmarks.
## Performance
* Optimized path normalization for faster file handling.
* Significantly improved bookmark rendering by removing unnecessary
XPath lookups.
* Optimized dithered rectangle drawing (fillRectDither) using a
byte-aligned rendering implementation, improving display performance on
supported devices.
## Bug Fixes
* Fixed an issue where the Inverted Orientation label was incorrectly
combined with the Color Filter label for Geman localization.
* Fixed excessive ghosting on the X3 cover screen during sleep
## Summary
* **What is the goal of this PR?**
Replace the pixel-by-pixel `fillRectDither` implementation with a new
byte-aligned `fillRectImpl` that eliminates per-pixel
`rotateCoordinates` calls and Read-Modify-Write bitwise loops, yielding
a significant rendering speedup on ESP32 E-ink framebuffers.
Ported from @rhythmerc's crosspoint-reader fork commit 27ea625.
* **What changes are included?**
- **`GfxRenderer.cpp` — `fillRectDither` refactor:** The existing
`if/else if` chain is replaced with a `switch` statement that delegates
each `Color` case to the new `fillRectImpl<Color>()` template,
eliminating runtime branching.
- **`GfxRenderer.cpp` — new `fillRectImpl<C>()` template:** Core of the
optimization. Key behaviors:
- Clips the rectangle in logical space upfront.
- Rotates only **2 opposing corner points** (top-left and bottom-right)
into physical framebuffer space instead of rotating every pixel
individually.
- Derives physical-space `byteStart`/`byteEnd` and precomputes
`headMask` / `tailMask` for MSB-first partial-byte boundaries,
performing RMW only on the edge bytes.
- **Solid fills (`Black` / `White`):** Uses `memset` for all interior
full-byte runs per row — no per-pixel writes.
- **Dithered fills (`LightGray` / `DarkGray`):** Precomputes both parity
variants of `blackMask` (even/odd `py`) **outside** the row loop,
eliminating the previously re-evaluated 8-bit construction loop on every
physical row. Interior full bytes are then written with a single
`memset(whiteMask)`.
- Uses `if constexpr` throughout to dispatch on `Color` at compile time,
generating zero runtime branches per template instantiation.
- **`GfxRenderer.h`:** Declares the new private `fillRectImpl<Color>()`
template method with an explanatory doc-comment.
- **Explicit template instantiations** added for all four active `Color`
variants (`Black`, `White`, `LightGray`, `DarkGray`).
## Additional Context
* **Performance:** The primary motivation is ESP32 E-ink framebuffer
performance. The old path called `rotateCoordinates` and did a full RMW
for every single pixel in the rectangle. The new path calls
`rotateCoordinates` exactly **twice** per fill regardless of rectangle
size, then operates at byte granularity — a complexity reduction from
O(W×H) coordinate transforms to O(1).
* **Dither correctness:** The `blackMask` precomputation relies on the
dither pattern having period 2 in both logical X and Y, which makes the
per-row byte pattern repeat with period 2 in `py`. Reviewers should
verify the `lxBase`/`lyBase` derivations for all four orientations
(`Portrait`, `PortraitInverted`, `LandscapeClockwise`,
`LandscapeCounterClockwise`) match the inverse of `rotateCoordinates`.
* **Edge case — single-byte rows:** When `byteStart == byteEnd`, the
head and tail masks are ANDed together into a single `rectMask` to avoid
double-masking the same byte. This path should be tested with narrow
rectangles (width < 8px).
* **No behavioral change for `Color::Clear`:** The `Clear` case exits
early via `if constexpr` and is a no-op, matching the original behavior.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< YES >**_
---------
Co-authored-by: Ryan Mercado <rmercado@firstdollar.com>
Force display resync on X3 when HALF refresh is requested to clear prior content before rendering. Add grayscale preconditioning for X3's UC81xx controller to even out single-pixel dithering artifacts that appear as speckle with its turbo BW waveform.
## Summary
fix#2414
### Root Cause
`updateBookmarkFlag()` was introduced in commit 1db1442 and is executed
on every render (every page turn). The function calls:
`ProgressMapper::toSavedProgress()`
→ `ChapterXPathResolver::findXPathForProgress()`
This path decompresses the current EPUB section content twice:
1. To count visible characters.
2. To resolve the corresponding XPath.
For larger sections (e.g. ~133 KB decompressed content), this adds
approximately **1 second of I/O overhead per page turn**, with the cost
increasing as chapter size grows.
### Fix
`updateBookmarkFlag()` only needs to determine whether a bookmark falls
within the currently displayed page range.
The required information is already available during rendering:
* `currentPage`
* `section->pageCount`
* `currentSpineIndex`
Instead of converting the current location to a saved progress object
(and resolving an XPath), the implementation now computes the current
page's progress range directly and compares bookmark percentages against
that range.
This is effectively the same percentage-based matching logic already
used as a fallback in `bookmarkMatchesProgress()` when XPath matching is
unavailable.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< PARTIALLY >**_
## Summary
* **What is the goal of this PR?**
* Fix the “Inverted” translation so reader orientation and color/filter
inversion can use separate labels.
* **What changes are included?**
* Adds `STR_ORIENTATION_INVERTED` for the inverted portrait orientation
option.
* Updates the reader orientation setting to use
`STR_ORIENTATION_INVERTED` instead of reusing `STR_INVERTED`.
* Leaves `STR_INVERTED` for the sleep cover filter and tilt page-turn
mode
* Adds the new orientation string across all 26 locale YAML files.
## Additional Context
* The original issue was found by a user in German, where `STR_INVERTED`
was translated as `Hochformat 180°`, which made sense for orientation
but not for color filters.
* This is a UI-label-only change. It does not change persisted
orientation values or settings behavior.
* Reviewer note: non-English wording may still benefit from
native-speaker review, especially for the new orientation-specific
labels and to verify the interchangeable usage between inverted color
and inverted tilt page turn direction.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< YES >**_
(#2334)
Introduces a new display method that prepares the framebuffer as a base
frame for grayscale overlays. On X3 panels, this uses the OEM
differential base waveform (AA-pre-BW) without forcing a resync. Other
panels fall back to normal display with configurable refresh mode.
Dependent upon matching SDK commit to work
## Summary
This PR enhances the EPUB reader's bookmark system with two
complementary improvements: a per-page bookmark indicator icon and
toggle behavior on the existing long-press action.
---
### What Changed
**Bookmark Toggle (was: add-only)**
The long-press Confirm action now toggles bookmarks rather than always
adding. `addBookmark()` checks whether a bookmark with the same xpath
already exists in the in-memory cache:
- If found → removes it and shows "Bookmark removed."
- If not found → adds it and shows "Bookmark added."
A new `STR_BOOKMARK_REMOVED` translation string was added to support the
removal message.
**Bookmark Icon Indicator**
A `BookmarkIcon` is now drawn at the top-right corner of the page
whenever the current page has a bookmark. `updateBookmarkFlag()` is
called at render time to determine whether the current page is
bookmarked.
**In-Memory Bookmark Cache**
Bookmarks are now loaded into `cachedBookmarks` on `onEnter()` rather
than being re-read from disk on every toggle. All subsequent add/remove
operations work against this cache and flush to disk, avoiding redundant
file reads on each bookmark action.
**Faster bookmarks list**
Previously, calculating "page X/Y" for each entry required decompressing
the entire spine item. We now persist `si`/`pc`/`pp` (spine index, page
count, and page progress) in the bookmark JSON when saving, and restore
them when loading. This avoids the expensive `toCrossPoint()` loop in
`onEnter()`, significantly reducing the cost of initializing the
bookmarks list.
---
### Files Changed
- `EpubReaderActivity.cpp` — `addBookmark()` toggle logic,
`updateBookmarkFlag()` (new), icon rendering in `renderContents()`,
cache initialization in `onEnter()`
- `EpubReaderActivity.h` — new fields: `currentPageBookmarked`,
`bookmarkRemoved`, `cachedBookmarks`; new method declaration
`updateBookmarkFlag()`
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< PARTIALLY >**_
---------
Co-authored-by: Julia Nguyen <julia@uxj.io>
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
Fixes footnote links landing in start section instead of the specific
foot note target.
* **What changes are included?**
ChapterHtmlSlimParser.cpp: call flushPendingAnchor() before overwriting
pendingAnchorId. First id got lost due to consecutive non-block elements
carry ids, the first id was lost and the reader had no page to jump to,
so it defaulted to page 0.
## Additional Context
Tested with the epubs attached to to #2336. Need to clear .crosspoint/
cache after flashing so the anchor map gets rebuilt with the fix.
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code?
Partially assisted with writing documentation.
## Summary
* **What is the goal of this PR?**
* Make manual clock sync work even when the device is not already
connected to Wi-Fi, so the user can start the sync flow directly from
settings instead of being blocked by connection state.
* **What changes are included?**
* `ClockSyncActivity` now launches the normal Wi-Fi selection flow
before syncing when the device is offline.
* After Wi-Fi selection succeeds, clock sync resumes automatically and
performs the existing forced NTP sync.
* If clock sync had to bring Wi-Fi up, the activity disconnects and uses
the existing silent restart cleanup path to avoid leaving the device in
a fragmented post-Wi-Fi heap state.
* The completion UI now only advertises Back, matching the updated input
handling.
## Additional Context
* Existing behavior is unchanged when Wi-Fi is already connected: the
activity syncs immediately.
* Cancelling Wi-Fi selection exits the clock sync flow.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< YES >**_
## Summary
* Adds a live font preview pane to the font selection screen so users
can see how a font looks before committing to it.
* Changes
* A preview pane occupying the top 30% of the font selection screen,
rendering sample pangram text in the previewed font
* A two-step confirm flow: first press (enter button) previews the font,
second press selects it
* Back restores the original font settings, so browsing has no side
effects
* Layout dimensions cached in `onEnter()` to avoid redundant
recalculation between `loop()` and `render()`
## Additional Context
* Preview sample text is hardcoded English; didn't want to use AI for
translation as I would not be able to verify the output in most
languages...
* The preview pane reduces visible list height; this is compensated by
passing the reserved height into `getNumberOfItemsPerPage`
---
### AI Usage
Did you use AI tools to help write this code? **PARTIALLY**
AI use for assisting in coding and in writing the PR description.
## Summary
* **What is the goal of this PR?**
Fixes#2275. A book could get stuck reopening on an old page, with
progress no
longer saving and neither "Delete Book Cache" nor "Clear Reading Cache"
able to
fix it. Root cause: `progress.bin` was written truncate-in-place, so an
interrupted write (power loss, or a crash mid-SPI during sleep) left it
with a
broken FAT cluster chain that the firmware could neither rewrite nor
delete —
recovery required `fsck`/manual deletion on a host PC.
Confirmed in the SDK: `SDCardManager::openFileForWrite` opens with
`O_RDWR | O_CREAT | O_TRUNC`, so the canonical file is zeroed before the
few
progress bytes are rewritten — exactly the window that corrupts the FAT
chain.
* **What changes are included?**
* New shared helper `ProgressFile::writeAtomic()`
(`src/activities/reader/ProgressFile.h`): writes progress to
`progress.bin.tmp`, flushes and closes it, then `remove`s the old
`progress.bin` and `rename`s the temp into place. An interrupted write
now
only ever damages the throwaway temp; the canonical file is never torn.
* All three readers route their progress saves through the helper:
EPUB (`EpubReaderUtils.h`), `TxtReaderActivity`, `XtcReaderActivity` —
they
all shared the identical vulnerable pattern.
* Minor: `EpubReaderUtils::saveProgress` now takes `const Epub&` (clears
a
cppcheck `constParameterReference` finding).
## Additional Context
* **Crash-safe, not metadata-atomic.** On FAT the replace is `remove` +
`rename`
(two directory ops; SdFat's `rename` won't overwrite, hence
remove-first). A
crash between them leaves *neither* file, which reads as "no saved
progress" on
next launch — a harmless reset to an old page, never a
corrupt/unclearable file.
The guarantee is that `progress.bin` is never half-written.
* **Prevents, does not repair.** This stops new corruption on healthy
cards. It
cannot fix an already-corrupted `progress.bin` (removing it may itself
fail at
the FAT level) — those still need `fsck`/manual deletion, as in the
issue's
workaround.
* **Known follow-up (out of scope here):** a crash *while writing the
temp* can
leave an orphan `progress.bin.tmp`. It's harmless and self-healing (the
next
save overwrites it, and it never blocks reading progress), but a
boot-time
orphan-`.tmp` cleanup would be a tidy follow-up.
* **Focus areas for review:** the close-before-rename ordering in
`ProgressFile.h` and the remove-before-rename rationale.
## Verification
* `./bin/clang-format-fix` — clean
* `pio check --fail-on-defect low --fail-on-defect medium
--fail-on-defect high` — no defects
* `pio run` — SUCCESS (RAM 30.9%, Flash 78.8%; footprint essentially
unchanged)
* Tested on a **Xteink X4** device: open book, turn pages, sleep/exit,
reopen —
progress now restores to the navigated page across all three readers
(EPUB / TXT / XTC).
---
### AI Usage
Did you use AI tools to help write this code? _**YES**_
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
## Summary
- Hold the menu (Confirm) button for ≥1s while reading an EPUB to launch
the existing `KOReaderSyncActivity` directly — replaces the three-step
path (open reader menu → scroll to Sync → confirm) with a single
gesture.
- Reuses `ReaderUtils::GO_HOME_MS` (same 1s threshold used by long-press
Back) and the existing `KOREADER_STORE.hasCredentials()` guard.
- Adds a Controls picker **"Long-press Menu"** (`longPressMenuFunction`,
default **Bookmark**) that **cycles through the available functions**
bound to the long-press gesture: `KOSync → Disabled → Bookmark`. The
field name and `LONG_PRESS_MENU_FUNCTION` enum are intentionally general
so future actions (dictionary lookup, table of contents, etc.) can be
appended without another schema migration. The setting is **not** a
binary toggle.
- Existing menu Sync entry still works — both call sites share one
extracted helper (`launchKOReaderSync`); no logic duplication.
- Short-press Confirm release is gated on duration so the reader menu
does not also open after a long press that *acts*, mirroring the
existing long-press Back pattern.
- **No-credentials fall-through:** `launchKOReaderSync()` now returns
whether it acted. When the function is set to KOSync but no KOReader
credentials are stored, the long-press is a no-op that **falls through
to open the reader menu** — so the menu stays reachable instead of the
hold silently swallowing the gesture. The release is only suppressed
when sync actually launched or surfaced a save error.
## Test plan
- [x] `pio run` succeeds clean for the `default` ESP32-C3 environment.
- [x] On-device, value **KOSync**, valid KOReader credentials:
long-press Confirm ≥1s → sync screen launches; get + update progress
return HTTP 200; release does **not** also open the reader menu; returns
to the same page.
- [x] On-device, value **KOSync**, **no** credentials: long-press
Confirm falls through and **opens the reader menu** (regression fix);
short-press also opens the menu.
- [x] On-device: menu → Sync still launches the same screen (shared
helper) and syncs (200/200).
- [x] On-device, value **Bookmark**: long-press drops a bookmark and
does **not** also open the menu.
- [x] On-device, value **Disabled**: long-press Confirm opens the menu
on release; no sync, no bookmark.
- [x] On-device: long-press Back still goes to the file browser
(unchanged path).
- [x] Heap: epub is released before the TLS handshake (frees ~16 KB);
min free heap stayed ~84 KB during sync, well above the safe floor. No
panics/OOM across the session.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
---------
Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
## Summary
This PR adds the [Libre Baskerville
](https://github.com/impallari/Libre-Baskerville) font family to the
fonts available for download in CrossPoint.
## Additional Context
Baskerville is a classic font family, widely available in some form or
the other in most ereaders and widely used in publishing and in the
academy.
Libre Baskerville is a libre (SIL Open Font License v1) implementation
of it, which makes it possible for CrossPoint to ship it without issues.
---
### AI Usage
Did you use AI tools to help write this code? _**NO**_
Егор Мартынов
