Changes all sleep screen display refreshes and boot screens from
FULL_REFRESH to HALF_REFRESH to match OEM firmware behavior. The stock
firmware uses a single-pass 0xD7 waveform for sleep screens, not the
multi-flash GC waveform (0xF7) that FULL_REFRESH triggers. For grayscale
mode, HALF_REFRESH is required because the gray nudge LUT is calibrated
against the pixel charge state left by the single-pass waveform; using
FULL_REFRESH causes blotchy noise in gray areas. Also adds X3 wb_gc
passive byte (the one-byte 0x54 to 0x00, matching stock's passive WB
table in the gc nudge bank): Every X3 grayscale render, reader AA,
covers, and the sleep-cover nudge, gets it.
## Summary
* **What is the goal of this PR?** Fixes#2402. On the X3, the "Time to
Sleep"
picker's 5-minute side buttons were inverted (left increased, right
decreased)
and the on-screen legend didn't match the physical buttons.
* **What changes are included?**
* Flip the large-step (±5 min) direction on X3 so the left side button
decreases and the right increases, matching the layout. X4 is unchanged.
* Add a device-specific step-hint string
(`STR_SLEEP_TIMER_STEP_HINT_X3`)
selected via `gpio.deviceIsX3()`. X3 shows `+/-: 1 min Side buttons: 5
min`;
X4 keeps the original `Left/Right: 1 min Up/Down: 5 min`.
* Same fix applied to both slider pickers that read the raw up/down side
buttons: the Time-to-Sleep picker and the "Go to %" picker
(`EpubReaderPercentSelectionActivity`), each with its own X3 hint string
(`STR_SLEEP_TIMER_STEP_HINT_X3`, `STR_PERCENT_STEP_HINT_X3`).
## Additional Context
* **Root cause:** the X3's side buttons sit one on each edge of the
screen
(power on top), whereas the X4 has a vertical up/down rocker on the
right
edge. So `BTN_UP` is physically the *left* button on X3 but the *top*
button
on X4. The picker mapped up→+5 / down→−5 unconditionally, which reads
naturally on the X4 rocker but inverted on the X3's left/right buttons.
The
static legend ("Up/Down: 5 min") had the same X3-only mismatch.
* The codebase already detects the device at runtime and handles this
layout
difference elsewhere (e.g. `LyraTheme::drawSideButtonHints` draws "Up on
left,
Down on right" for X3), so this reuses the same `gpio.deviceIsX3()`
signal.
* Swept the codebase for other side-button sliders:
`ClockOffsetActivity` already
uses the `Next/Previous` (`ButtonNavigator`) abstraction, which resolves
to
left=decrement / right=increment on X3, so it needs no change. List/page
navigation (Wi-Fi, KOReader sync, BMP viewer) and the keyboard cursor
are also
unaffected. The two slider pickers above were the only ones using raw
up/down.
* **X4 is untouched** — same direction, same legend wording as before.
* **Tested on X3 hardware:** left side button now decreases, right
increases, and
the legend matches. X4 not yet tested on device (no unit on hand); its
behaviour and strings are unchanged from master.
* **Translations:** the new `STR_SLEEP_TIMER_STEP_HINT_X3` and
`STR_PERCENT_STEP_HINT_X3` were added to all 26 languages, but the
non-English
ones are AI-generated and would benefit from a native-speaker pass —
particularly Hebrew (RTL ordering with a leading `+/-`), Kazakh, and
Vietnamese.
---
### AI Usage
Did you use AI tools to help write this code? _**YES**_
---------
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
Uri Tauber