Crosspoint/platformio.ini

[platformio]
default_envs = default
build_cache_dir = .cache
extra_configs = platformio.local.ini

[crosspoint]
version = 1.4.1

[base]
platform = https://github.com/pioarduino/platform-espressif32/releases/download/55.03.37/platform-espressif32.zip
board = esp32-c3-devkitm-1
framework = arduino
monitor_speed = 115200
upload_speed = 921600
check_tool = cppcheck
check_flags = --enable=all --suppress=missingIncludeSystem --suppress=unusedFunction --suppress=unmatchedSuppression --suppress=*:*/.pio/* --inline-suppr
check_skip_packages = yes

board_upload.flash_size = 16MB
board_upload.maximum_size = 16777216
board_upload.offset_address = 0x10000

build_flags =
  -DARDUINO_USB_MODE=1
  -DARDUINO_USB_CDC_ON_BOOT=1
  -DEINK_DISPLAY_SINGLE_BUFFER_MODE=1
  -DDISABLE_FS_H_WARNING=1
  -DDESTRUCTOR_CLOSES_FILE=1
# https://libexpat.github.io/doc/api/latest/#XML_GE
  -DXML_GE=0
  -DXML_CONTEXT_BYTES=1024
  -std=gnu++2a
# Enable UTF-8 long file names in SdFat
  -DUSE_UTF8_LONG_NAMES=1
# Increase PNG scanline buffer to support up to 2048px wide images
# Default is (320*4+1)*2=2562, we need more for larger images
  -DPNG_MAX_BUFFERED_PIXELS=16416
  -DFREEINK_DEVICE_X4=1
  -DFREEINK_DEVICE_X3=1
  -Wno-bidi-chars
  -Wl,--wrap=panic_print_backtrace,--wrap=panic_abort,--wrap=bootloader_common_check_efuse_blk_validity
  -fno-exceptions
# FreeInk panel profiles: compile both X3 (792x528/UC8253) and X4 (800x480/SSD1677);
# the firmware picks the active one at runtime via HalDisplay setDisplayX3().
  -DFREEINK_DEVICE_X3=1
  -DFREEINK_DEVICE_X4=1
# BLE HID page-turner host (BleKeyboardHost). NimBLE role/bond config is baked into
# the prebuilt arduino-esp32 framework's sdkconfig.h, so we don't redefine it here
# (doing so only warns and has no effect). The host only compiles when
# FREEINK_CAP_BLE_HID_HOST is set on the env (below); with the capability off,
# BleKeyboardHost links stubs and pulls in zero NimBLE code.
  -DFREEINK_BLE_HID_SHOW_UNNAMED_DEVICES=0

build_unflags =
  -std=gnu++11
  -fexceptions

; Board configuration
board_build.flash_mode = dio
board_build.flash_size = 16MB
board_build.partitions = partitions.csv

; Shrink the NimBLE footprint for a 1-connection HID host moving 3-6 byte reports.
; Field-measured: begin() costs ~52 KB with these trims vs ~68 KB with the prebuilt
; framework defaults — and that 15 KB is the difference between the stack landing
; above the reader's render shed floor (stable coexistence) and below it (a
; guaranteed shed/restart flap). Rebuilds the Arduino core libs on first build
; (slower once, cached after; needs the CMake pin in platformio.local.ini on macOS).
custom_sdkconfig =
  CONFIG_BT_NIMBLE_ROLE_PERIPHERAL=n
  CONFIG_BT_NIMBLE_ROLE_BROADCASTER=n
  CONFIG_BT_NIMBLE_MAX_CONNECTIONS=1
  CONFIG_BT_NIMBLE_MAX_CCCDS=2
  CONFIG_BT_NIMBLE_ATT_PREFERRED_MTU=23
  CONFIG_BT_NIMBLE_MSYS_1_BLOCK_COUNT=6
  CONFIG_BT_NIMBLE_MSYS_2_BLOCK_COUNT=6      ; was 24 x 320 B
  CONFIG_BT_NIMBLE_ACL_BUF_COUNT=6           ; was 24 x 255 B
  CONFIG_BT_NIMBLE_HCI_EVT_HI_BUF_COUNT=12   ; was 30 x 70 B; only scan bursts need many
  ; IDF 5.5 sizes the HCI transport pools under TRANSPORT_* names; pin both spellings.
  CONFIG_BT_NIMBLE_TRANSPORT_ACL_FROM_LL_COUNT=6
  CONFIG_BT_NIMBLE_TRANSPORT_EVT_COUNT=12
  CONFIG_BT_NIMBLE_ATT_MAX_PREP_ENTRIES=4    ; was 64; a HID host never does prepared writes
  CONFIG_BT_CTRL_BLE_MAX_ACT=3               ; was 6; need conn + scan + initiate only
  CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM=50   ; was 100; pairing-time scan only
  CONFIG_BT_CTRL_ADV_DUP_FILT_MAX=10               ; was 30
  ; Keep the Arduino wrappers for the removed cloud components (below) out of
  ; the core source list; all other bundled libraries default to enabled.
  CONFIG_ARDUINO_SELECTIVE_COMPILATION=y
  CONFIG_ARDUINO_SELECTIVE_RainMaker=n
  CONFIG_ARDUINO_SELECTIVE_Insights=n

; Drop unused cloud components from the core rebuild. esp_insights/rainmaker
; require embedded server certs the lib builder can't generate
; ("https_server.crt.S not found"); this firmware uses none of them.
custom_component_remove =
  espressif/esp_insights
  espressif/esp_rainmaker
  espressif/esp_diagnostics
  espressif/esp_diag_data_store
  espressif/esp_schedule
  espressif/esp_rcp_update
  espressif/esp_secure_cert_mgr
  espressif/cbor

extra_scripts =
  pre:scripts/build_html.py
  pre:scripts/gen_i18n.py
  pre:scripts/git_branch.py
  pre:scripts/patch_jpegdec.py
  post:scripts/register_unit_tests_target.py

; Libraries
lib_deps =
  BatteryMonitor=symlink://freeink-sdk/libs/hardware/BatteryMonitor
  InputManager=symlink://freeink-sdk/libs/hardware/InputManager
  EInkDisplay=symlink://freeink-sdk/libs/display/FreeInkDisplay
  SDCardManager=symlink://freeink-sdk/libs/hardware/SDCardManager
  ; FreeInk HAL support libs the above depend on (BoardConfig pin maps, etc.).
  BoardConfig=symlink://freeink-sdk/libs/hardware/BoardConfig
  PowerManager=symlink://freeink-sdk/libs/hardware/PowerManager
  Rtc=symlink://freeink-sdk/libs/hardware/Rtc
  Imu=symlink://freeink-sdk/libs/hardware/Imu
  FreeInkUI=symlink://freeink-sdk/libs/ui/FreeInkUI
  Icons=symlink://freeink-sdk/libs/assets/Icons
  BleKeyboardHost=symlink://freeink-sdk/libs/network/BleKeyboardHost
  h2zero/NimBLE-Arduino @ ^2.3.8
  bblanchon/ArduinoJson @ 7.4.2
  ricmoo/QRCode @ 0.0.1
  bitbank2/PNGdec @ 1.1.6
  https://github.com/bitbank2/JPEGDEC.git#86282979224c8a32fd51e091ed5a35b0c699a52b
  links2004/WebSockets @ 2.7.3

[env:default]
extends = base
build_flags =
  ${base.build_flags}
  ; CROSSPOINT_VERSION is set by scripts/git_branch.py (includes branch + short SHA)
  -DENABLE_SERIAL_LOG
  -DLOG_LEVEL=2 ; Set log level to debug for development builds
  -DFREEINK_CAP_BLE_HID_HOST=1 ; BLE HID page-turner host (NimBLE)
  -DFREEINK_BLE_HID_SCAN_DEBUG=1 ; verbose BLE scan lifecycle/advertisement logs for bring-up
  -DFREEINK_BLE_HID_REPORT_DEBUG=1 ; raw HID report hex dumps + report-map hints (bring-up)


[env:gh_release]
extends = base
build_flags =
  ${base.build_flags}
  -DCROSSPOINT_VERSION=\"${crosspoint.version}\"
  -DENABLE_SERIAL_LOG
  -DLOG_LEVEL=1 ; Set log level to info for release builds
  -DFREEINK_CAP_BLE_HID_HOST=1 ; BLE HID page-turner host (NimBLE)

[env:gh_release_rc]
extends = base
build_flags =
  ${base.build_flags}
  -DCROSSPOINT_VERSION=\"${crosspoint.version}-rc+${sysenv.CROSSPOINT_RC_HASH}\"
  -DENABLE_SERIAL_LOG
  -DLOG_LEVEL=1 ; Set log level to info for release candidate builds
  -DFREEINK_CAP_BLE_HID_HOST=1 ; BLE HID page-turner host (NimBLE)

[env:slim]
extends = base
build_flags =
  ${base.build_flags}
  -DCROSSPOINT_VERSION=\"${crosspoint.version}-slim\"
  ; serial output is disabled in slim builds to save space
  -UENABLE_SERIAL_LOG