Unify the two splash-skip signals (RTC silent-reboot flag, SD
seamless-sleep flag) into one BootResume enum driving a single switch.
Storage unchanged; behavior-preserving apart from the fix.
Holding power to sleep from a WiFi activity (Font Download, OPDS, web
server, Calibre, KOReader sync) rebooted to home instead of sleeping.
goToSleep() runs the outgoing activity's onExit(), and those activities
call silentRestart() to clear heap fragmentation, so the heap-defrag
reboot fired before deep sleep could start.
enterDeepSleep() now latches deepSleepInProgress before goToSleep();
silentRestart()/silentRestartToReader() no-op while it's set. Deep sleep
is a full chip reset on wake, so it already clears the fragmentation the
reboot existed for.
Did you use AI tools to help write this code? partial
## Summary
**What is the goal of this PR?**
Adds a clearer Quick Resume sleep-screen flow. The previous “Page as
Sleep Screen” behavior is now exposed as a dedicated `Sleep Screen >
Quick Resume `option, with the timeout-only behavior controlled by a
renamed `Quick Resume on Timeout `setting.
**What changes are included?**
- Adds `Quick Resume` as a new `Sleep Screen` option.
- Renames the old `Page as Sleep Screen` setting to `Quick Resume on
Timeout`.
- Changes that setting’s choices from `Never / After Timeout / Always`
to `OFF / ON`.
- Makes `Quick Resume on Timeout = ON` equivalent to the old `After
Timeout` behavior.
- Makes `Sleep Screen > Quick Resume` equivalent to the old `Always`
behavior.
- Automatically forces `Quick Resume on Timeout` to `ON` when `Sleep
Screen` is set to `Quick Resume`.
- Renames internal setting references from `seamlessSleepScreen` to
`quickResumeSleepScreen`.
- Updates translations for the renamed setting label.
**Additional Context**
- This is mostly a settings/labeling restructure around existing
behavior, not a new rendering path.
- The runtime quick-resume behavior still uses the existing saved
framebuffer / last-screen sleep flow.
- Review focus areas:
- Sleep entry behavior from manual sleep vs timeout sleep.
- The automatic dependency where selecting `Sleep Screen > Quick Resume`
sets `Quick Resume on Timeout` to `ON`.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< YES >**_
---
**New `Quick Resume` option for `Sleep Screen` will automatically set
`Quick Resume on Timeout` to `ON`**:
<img width="480" height="800" alt="quick resume"
src="https://github.com/user-attachments/assets/94c553fd-a122-47a8-add9-f29694f55566"
/>
**Example where a different sleep screen setting like `Cover` can be
used in combination with the `Quick Resume on Timeout` setting**:
<img width="480" height="800" alt="cover + quick resume"
src="https://github.com/user-attachments/assets/dd18ce18-230b-4b78-808b-ac85f5e7d5d8"
/>
## Summary
After a silent reboot, there was a small window where the esp32 would
listen for button presses but the full refresh would hold the event
loop. This gave a UX experience where the silent reboot had completed to
the home screen, a user taps select (at any time during the process),
and they find themselves unexpectedly in a book.
## Additional Context
This must land after
https://github.com/crosspoint-reader/community-sdk/pull/11 and will need
the submodule SHA changes included in.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? partially
setTimeout(0) on the serial could trigger a subtle but obnoxious
underflow.
Eat a milli, save a reset button.
Did you use AI tools to help write this code? no
<img width="605" height="454" alt="image"
src="https://github.com/user-attachments/assets/bfd84afe-3b58-436e-9a5d-539af3ec3d4e"
/>
Actualized "Last" sleep screen setting from previous PRs, rebranded as a
~~`Seamless Sleep`~~ `Page as Sleep Screen` option with more
improvements.
https://github.com/user-attachments/assets/59029ba6-007e-4841-abfa-f680d7e98b79
---
New option: `Page as Sleep Screen` - `Never (default)`, `After Timeout`,
`Always`
When enabled, it seamlessly sleeps on timeout or power off, making a
fast refresh for the moon icon. When waking up, we still show the last
page, instead of the boot screen, making it fully seamless.
I tried different icons such as "refresh arrow" and others, but they
looked not as nice as 3 simple dots.
With this mode, the device turns off 4 seconds faster. And has 6 seconds
less delay when turning back on. Much more responsive.
Previously, even a 10-minute timeout sometimes wasn't enough, and I'd
worry about seeing the book cover. It's now easier to use a shorter
sleep timeout: if I get distracted during a reading session but don't
want to stop, the new screen is much more inviting to come back to.
---
Did you use AI tools to help write this code? _**PARTIALLY**_.
---
Test v1.3.0 firmware.bin file
[download](https://github.com/user-attachments/files/28015193/firmware.zip)
Based on PRs #410 and #495Closes#400, #1649
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
When the device went into deep sleep while plugged into USB, a
power-button press would occasionally not wake it. The display held its
last frame, the chip stayed in deep sleep, and recovery required an
unplug + reset + hold-power cycle. On battery the symptom never surfaced
because the power button physically re-energises the chip.
Two peripherals were holding power domains alive across the deep sleep
boundary and interfering with the configured GPIO wake on the power
button:
1. HWCDC. Once Serial is initialized, the USB Serial/JTAG peripheral
keeps its power domain configured even with TX timeout at zero and no
host draining. Tear it down with Serial.end() in
HalPowerManager::startDeepSleep, gated by ENABLE_SERIAL_LOG to match the
Serial.begin site. This hit me if I was charging off my computer.
2. WiFi. enterDeepSleep had no WiFi teardown, so sleeping from any
network-using activity left the modem domain alive. Call
WiFi.disconnect(true) + WiFi.mode(WIFI_OFF) when WiFi is active. Wake
from deep sleep is effectively a chip reset, so no WiFi state needs to
survive. While this doesn't cause higher power drain, it apparently was
causing issues where I'd occasionally have the chip hang on sleep
transition from a wifi activity.
Confirmed on device.
Did you use AI tools to help write this code? partial
The "logs only flow if you unplug and replug the USB cable at the right
moment" symptom traced to two interacting problems with the ESP32-C3 USB
Serial/JTAG controller (HWCDC):
1. Serial.begin was gated on gpio.isUsbConnected(). That check sampled
USB state at one specific microsecond during boot. If USB enumeration on
the host hadn't completed by that moment (common after a reset that
auto- reconnects a moment later), Serial was never initialized and
stayed dead until the next boot where the timing happened to win.
2. HWCDC writes block for up to the configured TX timeout (default 250
ms) when the host has the port open but isn't actively draining — a
state the macOS USB CDC stack enters intermittently after reconnect. The
firmware then appears to hang on logging until a USB unplug+replug
cycles the peripheral and flushes the TX FIFO.
Fix: move the Serial init to the very top of setup() with a 250 ms stall
before Serial.begin (lets the USB peripheral power-on and host
enumeration complete on cold boot), and call logSerial.setTxTimeoutMs(0)
so writes drop bytes harmlessly when the host is slow instead of
stalling the firmware. Both warm reboot and cold power-on now produce
logs immediately.
Did you use AI tools to help write this code? partial
## Summary
* **What is the goal of this PR?**
Fix incorrect power button long-press detection during shutdown/wake
verification by introducing dedicated power button timing logic.
* **What changes are included?**
* Added getPowerButtonHeldTime() to HalGPIO as a wrapper over input
manager logic
* Replaced generic getHeldTime() usage with power-button-specific timing
in verifyPowerButtonWakeup()
* Ensures shutdown/wake decision is based only on actual power button
hold duration, not any-button timing
* Minor header update for new API exposure in HalGPIO.h
## Additional Context
This fixes a bug where holding another button while briefly pressing the
power button could incorrectly trigger shutdown behavior due to shared
timing state (getHeldTime()).
The change isolates power button timing to prevent cross-button
interference and makes shutdown logic reliable during multi-button
interactions.
No behavioral changes are expected outside of power-button handling
logic.
**Dependencies**
- SDK PR: https://github.com/crosspoint-reader/community-sdk/pull/3
This PR requires the `community-sdk` submodule to be updated after the
SDK change is merged.
- Fixes: #1881
---
### AI Usage
Did you use AI tools to help write this code? _**PARTIALLY**_
WiFi/LWIP/netif teardown scatters long-lived allocations across the
heap, leaving ~50KB of contiguous space unrecoverable without a reboot.
Reboot the SoC on exit from any wifi-using activity to guarantee a clean
heap. An RTC_NOINIT flag survives the reboot and tells setup() to skip
the boot splash and route the user back where they came from:
- File transfer / Calibre / OPDS / Font download -> home
- KOReader sync -> currently-open EPUB
Activities check WiFi.getMode() before rebooting, so backing out of the
network mode menu without joining doesn't trigger a cycle. KOSync also
esp_wifi_stop()s after the sync result so the radio is off while the
user reads it; full teardown happens at the reboot.
## Additional Context
The silent reboot skips the booting splash screen - it visibly looks
like a screen refresh. This does cause a disconnection/reconnection blip
for developers actively pulling logs over serial, but `pio device
monitor` and the like successfully reconnect and feed in the early boot
serial.
as an example:
```
[256676] [DBG] [ACT] Exiting activity: KOReaderSync
[256706] [DBG] [MAIN] Silent restart (target=reader)
ESP-ROM:esp32c3-api1-20210207
Build:Feb 7 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xf (SPI_FAST_FLASH_BOOT)
Saved PC:0x403872bc
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fcd72a0,len:0x990
load:0x403cbf10,len:0xac8
load:0x403ce710,len:0x4d28
entry 0x403cbf10
[22] [INF] [MAIN] Hardware detect: X4
[29] [SD] SD card detected
[43] [DBG] [CPS] Settings loaded from file
[58] [DBG] [KRS] Loaded KOReader credentials for user: jeremydk
[69] [DBG] [OPS] Loaded 1 OPDS servers from file
[69] [DBG] [UI] Using Lyra theme
[70] [DBG] [MAIN] Starting CrossPoint version 1.2.0-dev-detached-bde75787
...
[203] [DBG] [ACT] Entering activity: Reader
[211] [DBG] [EBP] Loading ePub: /Halting State - Charles Stross.epub
[221] [DBG] [BMC] Loaded cache data: 51 spine, 41 TOC entries
[246] [DBG] [CSS] Loaded 41 rules from cache
[247] [DBG] [EBP] Loaded ePub: /Halting State - Charles Stross.epub
```
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _PARTIALLY_
## Summary
First of several changes to decouple and clean up SD card fonts
integration. This change eliminates SdCardFontGlobals.h:
- Simply declare the `extern SdCardFontSystem sdFontSystem` in
SdCardFontSystem.h.
- `ActivityManager::goToReader` should not care about loading SD card
fonts. Instead do the same work in `ReaderActivity::onEnter`, after the
previous activity has exited and after ReaderActivity has validated the
file path.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
Add a complete SD card font subsystem that enables users to install and
use custom fonts beyond the three built-in families. This combines the
back-end firmware support (#1327) with the font configuration, build
pipeline, CI distribution, and user-facing management UI (#1392).
Core font system:
- Custom .cpfont binary format (v4) with multi-style support (regular,
bold, italic, bold-italic) packed into a single file per size
- On-demand glyph loading from SD card with two-pass prewarm rendering
to bulk-read glyphs per page, achieving near-flash performance for
Latin text (~697ms vs ~681ms) and viable CJK rendering (~32% slower)
- Persistent advance cache for layout measurement without SD I/O
- Overflow ring buffer for glyph cache misses during rendering
- Memory-conscious design: only advance tables kept in RAM; glyph
bitmaps, kern tables, and ligatures loaded on demand from SD
Font management:
- On-device WiFi download from GitHub Releases with manifest-based
discovery, install/update detection, and progress UI
- Web interface font upload, listing, and deletion via /fonts page
- Manual SD card copy to /fonts/ or /.fonts/ directories
- Font selection integrated into Settings > Reader > Font Family
Build pipeline:
- Declarative YAML config (sd-fonts.yaml) as single source of truth
for the 17-family font library (serif, sans, mono, accessibility)
- Python converter (fontconvert_sdcard.py) for TTF/OTF to .cpfont with
FreeType rasterization, class-based kerning, and ligature extraction
- Parallel build orchestrator with variable font instance extraction
- CI workflow publishing versioned + stable releases to a dedicated
crosspoint-fonts repository with auto-incrementing revision tags
- Centralized version constants (cpfont_version.py) shared across
build tooling and CI, with firmware headers as manual sync points
Additional fixes:
- CJK characters no longer get hyphens inserted at line breaks
- Advance table eliminates 30+ second stalls during CJK section
indexing for paragraphs with >512 unique codepoints
Closes#930
Co-authored-by: Zach Nelson <zach@zdnelson.com>
Co-authored-by: Justin <itsthisjustin@users.noreply.github.com>
Co-authored-by: jpirnay <jens@pirnay.com>
Co-authored-by: mcrosson <kemonine@kemonine.info>
When Power+Down is released with a slight stagger (Down before Power),
the Power release event leaked through to the activity loop, triggering
short-press Power actions like clip selection. Add a
screenshotComboActive flag that suppresses all input processing until
Power is fully released after a screenshot combo.
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
* **What changes are included?**
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**YES**_
## Summary
Another follow up to #1408. That PR revised the language.bin settings
file to version 2. After merging, it occurred to me that it would make
more sense to have the language inside the overall settings.json file,
easy for users to see and change directly.
This change adds migration from language.bin to settings.json. It only
migrates from the pre-#1408 v1 language.bin format, because v2 has only
been in for a couple of commits and I don't think we need long-term
maintenance code to handle it.
#1408 had a potential long-term maintenance issue for migration. It
assumed that the enum order of languages never changes, only grows. So,
e.g. "Portuguese (Portugal)" could never be added next to "Portuguese
(Brazil)", only appended. This change includes a hardcoded frozen
ordering of the language indices as they existed at 2f969a9, and
migrates to storing a language code string in the settings.json instead
for future reordering flexibility.
Similar to the settings.bin to settings.json migration, which renames
settings.bin to settings.bin.bak, this change renames language.bin to
language.bin.bak after adding the language setting to settings.json.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
## Summary
* Add support for configuring and using multiple OPDS servers, replacing
the previous single-server limitation. Closes
https://github.com/crosspoint-reader/crosspoint-reader/issues/1178
* New OpdsServerStore singleton (modeled after WifiCredentialStore) that
persists up to 8 OPDS servers to /.crosspoint/opds.json with MAC-based
password obfuscation.
* One-time migration from legacy single-server fields in
CrossPointSettings to the new store on first boot.
* New OpdsServerListActivity for the device UI — works in two modes: a
settings list (add/edit/delete servers) and a picker (select which
server to browse). When only one server is configured, the picker is
skipped automatically.
* Renamed CalibreSettingsActivity → OpdsSettingsActivity for clarity. It
now edits individual OpdsServer entries (name, URL, username, password,
delete).
* OpdsBookBrowserActivity now receives an OpdsServer at construction and
uses its credentials for all fetches/downloads, and shows the server
name in the header.
* HttpDownloader::fetchUrl and downloadToFile accept optional per-call
username/password parameters instead of reading from global settings.
* REST API endpoints on CrossPointWebServer: GET /api/opds, POST
/api/opds, POST /api/opds/delete — passwords are never exposed over the
API (only a hasPassword flag), and omitting the password field on update
preserves the existing one.
* Web UI (SettingsPage.html) with dynamic OPDS server management cards —
add, edit, save, and delete servers from the browser.
<img width="932" height="906" alt="SCR-20260416-stvu"
src="https://github.com/user-attachments/assets/a8f18d84-4204-46a0-bb31-b73d24b3255f"
/>
## Additional Context
* The OpdsServerStore JSON format and obfuscation scheme are identical
to WifiCredentialStore, so the same JsonSettingsIO infrastructure
handles both.
* The web API uses POST /api/opds/delete instead of DELETE /api/opds
because the ESP32 WebServer doesn't support the DELETE method with a
request body.
* Existing single-server configurations are migrated automatically — no
user action required. After migration the legacy CrossPointSettings
fields are cleared so it only runs once.
* The HttpDownloader changes are backward-compatible: the credential
parameters default to empty strings, so existing callers are unaffected.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< YES >**_
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
## Summary
Fixes#258. Bookerly is not licensed for use in CrossPoint. Switched to
Google's open Noto Serif font.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
If the system reboots from crash, display the reason and tell user to
include `crash_report.txt` file.
To test this, simply add an `assert(false)` somewhere inside the code.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **NO**
## Summary
Adds an option to allow manual screen refresh on power button short
press.
## Additional Context
there's an option to refresh the screen after a set number of pages. but
sometimes a manual refresh is needed to clear up stale ink pixels. this
works everywhere both in and out of reading mode.
resolves#550
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it helps set the right
context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_, to
understand the project structure.
## Summary
Adds Xteink X3 hardware support to CrossPoint Reader. The X3 uses the
same SSD1677 e-ink controller as the X4 but with a different panel
(792x528 vs 800x480), different button layout, and an I2C fuel gauge
(BQ27220) instead of ADC-based battery reading.
All X3-specific behavior is gated by runtime device detection — X4
behavior is unchanged.
Depends on community-sdk X3 support: open-x4-epaper/community-sdk#19
(merged).
## Changes
### HAL Layer
**HalGPIO** (`lib/hal/HalGPIO.cpp/.h`)
- I2C-based device fingerprinting at boot: probes for BQ27220 fuel
gauge, DS3231 RTC, and QMI8658 IMU to distinguish X3 from X4
- Detection result cached in NVS for fast subsequent boots
- Exposes `deviceIsX3()` / `deviceIsX4()` helpers used throughout the
codebase
- X3 button mapping (7 GPIOs vs X4's layout)
- USB connection detection and wake classification for X3
**HalDisplay** (`lib/hal/HalDisplay.cpp/.h`)
- Calls `einkDisplay.setDisplayX3()` before init when X3 is detected
- Requests display resync after power button / flash wake events
- Runtime display dimension accessors (`getDisplayWidth()`,
`getDisplayHeight()`, `getBufferSize()`)
- Exposed as global `display` instance for use by image converters
**HalPowerManager** (`lib/hal/HalPowerManager.cpp/.h`)
- X3 battery reading via I2C fuel gauge (BQ27220 at 0x55, SOC register)
- X3 power button uses GPIO hold for deep sleep
### Display & Rendering
**GfxRenderer** (`lib/GfxRenderer/GfxRenderer.cpp/.h`)
- Buffer size and display dimensions are now runtime values (not
compile-time constants) to support both panel sizes
- X3 anti-aliasing tuning: only the darker grayscale level is applied to
avoid washed-out text on the X3 panel. X4 retains both levels via
`deviceIsX4()` gate
**Image Converters** (`lib/JpegToBmpConverter`, `lib/PngToBmpConverter`)
- Cover image prescale target uses runtime display dimensions from HAL
instead of hardcoded 800x480
### UI Themes
**BaseTheme / LyraTheme** (`src/components/themes/`)
- X3 button position mapping for the different physical layout
- Adjusted UI element positioning for 792x528 viewport
### Boot & Init
**main.cpp**
- X3 hardware detection logging
- Adjusted init sequence for X3 (no `HalSystem::begin()` dependency on
X3 path)
**HomeActivity**
- Uses runtime `renderer.getBufferSize()` instead of static
`GfxRenderer::getBufferSize()`
FYI I did not add support for the gyro page turner. That can be it's own
PR.
## Summary
* **What is the goal of this PR?** All praise goes to @didacta for his
PR #537. Just picked up the reviewer comments to contain the changes as
suggested (there was no response for more than 6 weeks, so I wanted to
reanimate this feature).
Just one addition: should recognize usb cable plug ins / retractions and
update the icon immediately
* **What changes are included?**
## Additional Context
see #537
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< NO >**_
## Purpose
This PR includes some preparatory changes that are needed for an
upcoming performant CJK font feature. The changes have no impact on
render time and heap allocation for latin text. **Despite this, I think
these changes stand on their own as a better font
compression/decompression implementation.**
## Summary
- Font decompressor rewrite: Replaced the 4-slot LRU group cache with a
two-tier system — a page buffer (glyphs prewarmed before rendering
begins) and a hot-group fallback (last decompressed group retained for
non-prewarmed
glyphs).
- Byte-aligned compressed bitmap format: Glyph bitmaps within compressed
groups are now stored row-padded rather than tightly packed before
DEFLATE compression, improving compression ratios by making identical
pixel rows produce
identical byte patterns. Glyphs are compacted back to packed format on
demand at render time. Reduces flash size by 155 KB.
- Page prewarm system: Added `Page::collectText` and
`Page::getDominantStyle` to extract per-style glyph requirements before
rendering, and `GfxRenderer::prewarmFontCache` to pre-decompress only
the groups needed for the dominant style
— eliminating mid-render decompression for the common case.
- UTF-8 robustness fixes: `utf8NextCodepoint` now validates continuation
bytes and returns a replacement glyph on malformed input;
`ChapterHtmlSlimParser` correctly preserves incomplete multi-byte
sequences across word-buffer flush
boundaries rather than splitting them.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**YES**_ Architecture and
design was done by me, refined a bit by Claude. Code mostly by Claude,
but not entirely.
## Summary
Ref comment:
https://github.com/crosspoint-reader/crosspoint-reader/pull/1010#pullrequestreview-3828854640
This PR introduces `ActivityManager`, which mirrors the same concept of
Activity in Android, where an activity represents a single screen of the
UI. The manager is responsible for launching activities, and ensuring
that only one activity is active at a time.
Main differences from Android's ActivityManager:
- No concept of Bundle or Intent extras
- No onPause/onResume, since we don't have a concept of background
activities
- onActivityResult is implemented via a callback instead of a separate
method, for simplicity
## Key changes
- Single `renderTask` shared across all activities
- No more sub-activity, we manage them using a stack; Results can be
passed via `startActivityForResult` and `setResult`
- Activity can call `finish()` to destroy themself, but the actual
deletion will be handled by `ActivityManager` to avoid `delete this`
pattern
As a bonus: the manager will automatically call `requestUpdate()` when
returning from another activity
## Example usage
**BEFORE**:
```cpp
// caller
enterNewActivity(new WifiSelectionActivity(renderer, mappedInput,
[this](const bool connected) { onWifiSelectionComplete(connected); }));
// subactivity
onComplete(true); // will eventually call exitActivity(), which deletes the caller instance (dangerous behavior)
```
**AFTER**: (mirrors the `startActivityForResult` and `setResult` from
android)
```cpp
// caller
startActivityForResult(new NetworkModeSelectionActivity(renderer, mappedInput),
[this](const ActivityResult& result) { onNetworkModeSelected(result.selectedNetworkMode); });
// subactivity
ActivityResult result;
result.isCancelled = false;
result.selectedNetworkMode = mode;
setResult(result);
finish(); // signals to ActivityManager to go back to last activity AFTER this function returns
```
TODO:
- [x] Reconsider if the `Intent` is really necessary or it should be
removed (note: it's inspired by
[Intent](https://developer.android.com/guide/components/intents-common)
from Android API) ==> I decided to keep this pattern fr clarity
- [x] Verify if behavior is still correct (i.e. back from sub-activity)
- [x] Refactor the `ActivityWithSubactivity` to just simple `Activity`
--> We are using a stack for keeping track of sub-activity now
- [x] Use single task for rendering --> avoid allocating 8KB stack per
activity
- [x] Implement the idea of [Activity
result](https://developer.android.com/training/basics/intents/result)
--> Allow sub-activity like Wifi to report back the status (connected,
failed, etc)
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **PARTIALLY**, some
repetitive migrations are done by Claude, but I'm the one how ultimately
approve it
---------
Co-authored-by: Zach Nelson <zach@zdnelson.com>
## Summary
* **What is the goal of this PR?** During debugging of #1092 i
desperately needed to monitor the biggest allocatable block of memory on
the heap
* **What changes are included?** Added informaqtion to debug output,
amended monitor utility to pick it up
## Additional Context
---
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
Ref: https://github.com/crosspoint-reader/crosspoint-reader/issues/1110
Power lock is automatically acquired on `render()`. However, instead of
using `render()`, sleep activity render everything right inside
`onEnter()`, so no power lock was acquired.
After https://github.com/crosspoint-reader/crosspoint-reader/pull/1016 ,
the power lock will also be acquired on activity transition.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **NO**
## Summary
* **What is the goal of this PR?** Small fix for bug I found.
## Additional Context
1. `RecentBooksActivity::loop()` calls
`onSelectBook(recentBooks[selectorIndex].path)` - passing a
**reference** to the path
2. `onSelectBook` is `onGoToReader` which first calls `exitActivity()`
3. `exitActivity()` triggers `RecentBooksActivity::onExit()` which call
`recentBooks.clear()`
4. The string reference `initialEpubPath` is now a **dangling
reference** - the underlying string has been destroyed
5. When the reference is then used in `new ReaderActivity(...)`, it
reads garbage memory
6. The same issue occurs in `HomeActivity` at line 200 with the same
pattern
The fix is to make a copy of the string in `onGoToReader` before calling
`exitActivity()`, so the path data persists even after the activity
clears its data structures.
---
### AI Usage
Did you use AI tools to help write this code? _**< YES >**_ Claude found
the bug, after I shared with it a serial log.
## Summary
The introduction of `HalGPIO` moved the `BatteryMonitor battery` object
into the member function `HalGPIO::getBatteryPercentage()`.
Then, with the introduction of `HalPowerManager`, this function was
moved to `HalPowerManager::getBatteryPercentage()`.
However, the original `BatteryMonitor battery` object is still utilized
by themes for displaying the battery percentage.
This PR replaces these deprecated uses of `BatteryMonitor battery` with
the new `HalPowerManager::getBatteryPercentage()` function.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO **_
## Summary
**What is the goal of this PR?**
Compress reader font bitmaps to reduce flash usage by 30.7%.
**What changes are included?**
- New `EpdFontGroup` struct and extended `EpdFontData` with
`groups`/`groupCount` fields
- `--compress` flag in `fontconvert.py`: groups glyphs (ASCII base group
+ groups of 8) and compresses each with raw DEFLATE
- `FontDecompressor` class with 4-slot LRU cache for on-demand
decompression during rendering
- `GfxRenderer` transparently routes bitmap access through
`getGlyphBitmap()` (compressed or direct flash)
- Uses `uzlib` for decompression with minimal heap overhead.
- 48 reader fonts (Bookerly, NotoSans 12-18pt, OpenDyslexic) regenerated
with compression; 5 UI fonts unchanged
- Round-trip verification script (`verify_compression.py`) runs as part
of font generation
## Additional Context
## Flash & RAM
| | baseline | font-compression | Difference |
|--|--------|-----------------|------------|
| Flash (ELF) | 6,302,476 B (96.2%) | 4,365,022 B (66.6%) | -1,937,454 B
(-30.7%) |
| firmware.bin | 6,468,192 B | 4,531,008 B | -1,937,184 B (-29.9%) |
| RAM | 101,700 B (31.0%) | 103,076 B (31.5%) | +1,376 B (+0.5%) |
## Script-Based Grouping (Cold Cache)
Comparison of uncompressed baseline vs script-based group compression
(4-slot LRU cache, cleared each page). Glyphs are grouped by Unicode
block (ASCII, Latin-1, Latin Extended-A, Combining Marks, Cyrillic,
General Punctuation, etc.) instead of sequential groups of 8.
### Render Time
| | Baseline | Compressed (cold cache) | Difference |
|---|---|---|---|
| **Median** | 414.9 ms | 431.6 ms | +16.7 ms (+4.0%) |
| **Pages** | 37 | 37 | |
### Memory Usage
| | Baseline | Compressed (cold cache) | Difference |
|---|---|---|---|
| **Heap free (median)** | 187.0 KB | 176.3 KB | -10.7 KB |
| **Heap free (min)** | 186.0 KB | 166.5 KB | -19.5 KB |
| **Largest block (median)** | 148.0 KB | 128.0 KB | -20.0 KB |
| **Largest block (min)** | 148.0 KB | 120.0 KB | -28.0 KB |
### Cache Effectiveness
| | Misses/page | Hit rate |
|---|---|---|
| **Compressed (cold cache)** | 2.1 | 99.85% |
------
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**YES**_
Implementation was done by Claude Code (Opus 4.6) based on a plan
developed collaboratively. All generated font headers were verified with
an automated round-trip decompression test. The firmware was compiled
successfully but has not yet been tested on-device.
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
## Summary
Continue my experiment from
https://github.com/crosspoint-reader/crosspoint-reader/pull/801
This PR add the ability to lower the CPU frequency on extended idle
period (currently set to 3 seconds). By default, the esp32c3 CPU is set
to 160MHz, and now on idle, we can reduce it to just 10MHz.
Note that while this functionality is already provided by [esp power
management](https://docs.espressif.com/projects/esp-idf/en/v4.3/esp32c3/api-reference/system/power_management.html),
the current Arduino build lacks of this, and enabling it is just too
complicated (not worth the effort compared to this PR)
Update: more info in
https://github.com/crosspoint-reader/crosspoint-reader/pull/852#issuecomment-3904562827
## Testing
Pre-condition for each test case: the battery is charged to 100%, and is
left plugged in after fully charged for an extra 1 hour.
The table below shows how much battery is **used** for a given duration:
| case / duration | 6 hrs | 12 hrs |
| --- | --- | --- |
| `delay(10)` | 26% | 48% |
| `delay(50)`, PR
https://github.com/crosspoint-reader/crosspoint-reader/pull/801 | 20% |
Not tested |
| `delay(50)` + low CPU freq (This PR) | Not tested | 25% |
| `delay(10)` + low CPU freq (1) | Not tested | Not tested |
(1) I decided not to test this case because it may not make sense. The
problem is that CPU frequency vs power consumption do not follow a
linear relationship, see
[this](https://www.arrow.com/en/research-and-events/articles/esp32-power-consumption-can-be-reduced-with-sleep-modes)
as an example. So, tight loop (10ms) + lower CPU freq significantly
impact battery life, because the active CPU time is now much higher
compared to the wall time.
**So in conclusion, this PR improves ~150% to ~200% battery use time per
charge.**
The projected battery life is now: ~36-48 hrs of reading time (normal
reading, no wifi)
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **NO**
## Summary
**What is the goal of this PR?**
This PR introduces Internationalization (i18n) support, enabling users
to switch the UI language dynamically.
**What changes are included?**
- Core Logic: Added I18n class (`lib/I18n/I18n.h/cpp`) to manage
language state and string retrieval.
- Data Structures:
- `lib/I18n/I18nStrings.h/cpp`: Static string arrays for each supported
language.
- `lib/I18n/I18nKeys.h`: Enum definitions for type-safe string access.
- `lib/I18n/translations.csv`: single source of truth.
- Documentation: Added `docs/i18n.md` detailing the workflow for
developers and translators.
- New Settings activity:
`src/activities/settings/LanguageSelectActivity.h/cpp`
## Additional Context
This implementation (building on concepts from #505) prioritizes
performance and memory efficiency.
The core approach is to store all localized strings for each language in
dedicated arrays and access them via enums. This provides O(1) access
with zero runtime overhead, and avoids the heap allocations, hashing,
and collision handling required by `std::map` or `std::unordered_map`.
The main trade-off is that enums and string arrays must remain perfectly
synchronized—any mismatch would result in incorrect strings being
displayed in the UI.
To eliminate this risk, I added a Python script that automatically
generates `I18nStrings.h/.cpp` and `I18nKeys.h` from a CSV file, which
will serve as the single source of truth for all translations. The full
design and workflow are documented in `docs/i18n.md`.
### Next Steps
- [x] Python script `generate_i18n.py` to auto-generate C++ files from
CSV
- [x] Populate translations.csv with initial translations.
Currently available translations: English, Español, Français, Deutsch,
Čeština, Português (Brasil), Русский, Svenska.
Thanks, community!
**Status:** EDIT: ready to be merged.
As a proof of concept, the SPANISH strings currently mirror the English
ones, but are fully uppercased.
---
### AI Usage
Did you use AI tools to help write this code? _**< PARTIALLY >**_
I used AI for the black work of replacing strings with I18n references
across the project, and for generating the documentation. EDIT: also
some help with merging changes from master.
---------
Co-authored-by: google-labs-jules[bot] <161369871+google-labs-jules[bot]@users.noreply.github.com>
Co-authored-by: yeyeto2788 <juanernestobiondi@gmail.com>
## Summary
* Definition and use of a central LOG function, that can later be
extended or completely be removed (for public use where debugging
information may not be required) to save flash by suppressing the
-DENABLE_SERIAL_LOG like in the slim branch
* **What changes are included?**
## Additional Context
* By using the central logger the usual:
```
#include <HardwareSerial.h>
...
Serial.printf("[%lu] [WCS] Obfuscating/deobfuscating %zu bytes\n", millis(), data.size());
```
would then become
```
#include <Logging.h>
...
LOG_DBG("WCS", "Obfuscating/deobfuscating %zu bytes", data.size());
```
You do have ``LOG_DBG`` for debug messages, ``LOG_ERR`` for error
messages and ``LOG_INF`` for informational messages. Depending on the
verbosity level defined (see below) soe of these message types will be
suppressed/not-compiled.
* The normal compilation (default) will create a firmware.elf file of
42.194.356 bytes, the same code via slim will create 42.024.048 bytes -
170.308 bytes less
* Firmware.bin : 6.469.984 bytes for default, 6.418.672 bytes for slim -
51.312 bytes less
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _NO_
---------
Co-authored-by: Xuan Son Nguyen <son@huggingface.co>
## Summary
* Add a small loop in main to be able to receive external commands,
currently being sent via the debugging_monitor
* Implemented command: cmd:SCREENSHOT sends the currently displayed
screen to the monitor, which will then store it to screenshot.bmp
## Additional Context
I was getting annoyed with taking tilted/unsharp photos of the device
screen, so I added the ability to press Enter during the monitor
execution and type SCREENSHOT to send a command. Could be extended in
the future
[screenshot.bmp](https://github.com/user-attachments/files/25213230/screenshot.bmp)
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? No
## Summary
This PR extends the delay in main loop from 10ms to 50ms after the
device is idle for a while. This translates to extended battery life in
a longer period (see testing section above), while not hurting too much
the user experience.
With the help from [this
patch](https://github.com/ngxson/crosspoint-reader/tree/xsn/measure_cpu_usage),
I was able to measure the CPU usage on idle:
```
PR:
[20017] [MEM] Free: 150188 bytes, Total: 232092 bytes, Min Free: 150092 bytes
[20017] [IDLE] Idle time: 99.62% (CPU load: 0.38%)
[30042] [MEM] Free: 150188 bytes, Total: 232092 bytes, Min Free: 150092 bytes
[30042] [IDLE] Idle time: 99.63% (CPU load: 0.37%)
[40067] [MEM] Free: 150188 bytes, Total: 232092 bytes, Min Free: 150092 bytes
[40067] [IDLE] Idle time: 99.62% (CPU load: 0.38%)
master:
[20012] [MEM] Free: 195016 bytes, Total: 231532 bytes, Min Free: 132460 bytes
[20012] [IDLE] Idle time: 98.53% (CPU load: 1.47%)
[30017] [MEM] Free: 195016 bytes, Total: 231532 bytes, Min Free: 132460 bytes
[30017] [IDLE] Idle time: 98.53% (CPU load: 1.47%)
[40022] [MEM] Free: 195016 bytes, Total: 231532 bytes, Min Free: 132460 bytes
[40022] [IDLE] Idle time: 98.53% (CPU load: 1.47%)
```
While this is a x3.8 reduce in CPU usage, it doesn't translate to the
same amount of battery life extension in real life. The reasons are:
1. The CPU is not shut down completely
2. freeRTOS tick is still running (however, I planned to experiment with
tickless functionality)
3. Current leakage to other components, for example: voltage dividers,
eink screen, SD card, etc
A note on
[light-sleep](https://docs.espressif.com/projects/esp-idf/en/stable/esp32c3/api-reference/system/sleep_modes.html)
functionality: it is not possible in our use case because:
- Light-sleep for 50ms introduce too much overhead on wake up, it has
negative effect on battery life
- Light-sleep for longer period doesn't work because the ADC GPIO
buttons cannot be used as wake up source
## Testing (duration = 6 hrs)
To test this, I patched the `CrossPointSettings::getSleepTimeoutMs()` to
always returns a timeout of 6 hrs. This allow me to leave the device
idle for 6 hrs straight.
- On master branch, 6 hrs costs 26% battery life (100% --> 74%), meaning
battery life is ~23 hrs
- With this PR, 6 hrs costs 20% battery life (100% --> 80%), meaning
battery life is ~30 hrs
So in theory, this extends the battery by about 7 hrs. Even with some
error margin added, I think 3 hrs increase is possible with a normal
usage setup (i.e. only read ebooks, no wifi)
## Additional Context
Would appreciate if someone can test this with an oscilloscope.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **NO**
This PR unifies navigation handling & adds system-wide support for
continuous navigation.
## Summary
Holding down a navigation button now continuously advances through items
until the button is released. This removes the need for repeated
press-and-release actions and makes navigation faster and smoother,
especially in long menus or documents.
When page-based navigation is available, it will navigate through pages.
If not, it will progress through menu items or similar list-based UI
elements.
Additionally, this PR fixes inconsistencies in wrap-around behavior and
navigation index calculations.
Places where the navigation system was updated:
- Home Page
- Settings Pages
- My Library Page
- WiFi Selection Page
- OPDS Browser Page
- Keyboard
- File Transfer Page
- XTC Chapter Selector Page
- EPUB Chapter Selector Page
I’ve tested this on the device as much as possible and tried to match
the existing behavior. Please let me know if I missed anything. Thanks 🙏
---
Following the request from @osteotek and @daveallie for system-wide
support, the old PR (#379) has been closed in favor of this
consolidated, system-wide implementation.
---
### AI Usage
Did you use AI tools to help write this code? _**PARTIALLY**_
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
Continue my changes to introduce the HAL infrastructure from
https://github.com/crosspoint-reader/crosspoint-reader/pull/522
This PR touches quite a lot of files, but most of them are just name
changing. It should not have any impacts to the end behavior.
## Additional Context
My plan is to firstly add this small shim layer, which sounds useless at
first, but then I'll implement an emulated driver which can be helpful
for testing and for development.
Currently, on my fork, I'm using a FS driver that allow "mounting" a
local directory from my computer to the device, much like the `-v` mount
option on docker. This allows me to quickly reset `.crosspoint`
directory if anything goes wrong. I plan to upstream this feature when
this PR get merged.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? NO
## Summary
Ref https://github.com/crosspoint-reader/crosspoint-reader/pull/737
This PR further reduce ~25ms from rendering time, testing inside the
Setting screen:
```
master:
[68440] [GFX] Time = 73 ms from clearScreen to displayBuffer
PR:
[97806] [GFX] Time = 47 ms from clearScreen to displayBuffer
```
And in extreme case (fill the entire screen with black or gray color):
```
master:
[1125] [ ] Test fillRectDither drawn in 327 ms
[1347] [ ] Test fillRect drawn in 222 ms
PR:
[1334] [ ] Test fillRectDither drawn in 225 ms
[1455] [ ] Test fillRect drawn in 121 ms
```
Note that
https://github.com/crosspoint-reader/crosspoint-reader/pull/737 is NOT
applied on top of this PR. But with 2 of them combined, it should reduce
from 47ms --> 42ms
## Details
This PR based on the fact that function calls are costly if the function
is small enough. For example, this simple call:
```
int rotatedX = 0;
int rotatedY = 0;
rotateCoordinates(x, y, &rotatedX, &rotatedY);
```
Generated assembly code:
<img width="771" height="215" alt="image"
src="https://github.com/user-attachments/assets/37991659-3304-41c3-a3b2-fb967da53f82"
/>
This adds ~10 instructions just to prepare the registers prior to the
function call, plus some more instructions for the function's
epilogue/prologue. Inlining it removing all of these:
<img width="1471" height="832" alt="image"
src="https://github.com/user-attachments/assets/b67a22ee-93ba-4017-88ed-c973e28ec914"
/>
Of course, this optimization is not magic. It's only beneficial under 3
conditions:
- The function is small, not in size, but in terms of effective
instructions. For example, the `rotateCoordinates` is simply a jump
table, where each branch is just 3-4 inst
- The function has multiple input arguments, which requires some move to
put it onto the correct place
- The function is called very frequently (i.e. critical path)
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **NO**
## Summary
* **What is the goal of this PR?**
The goal of this PR is to deliver a fix for or at least mitigate the
impact of the issue described in #561
* **What changes are included?**
This PR includes a new option "Sunlight Fading Fix" under "Settings ->
Display".
When set to ON, we will disable the displays analog supply voltage after
every update and turn it back on before the next update.
## Additional Context
* Until now, I was only able to do limited testing because of limited
sunlight at my location, but the fix seems to be working. I'll also
attach a pre-built binary based on 0.16.0 (current master) with the fix
applied to the linked ticket, as building this fix is a bit annoying
because the submodule open-x4-sdk also needs an update.
* [PR in
open-x4-sdk](https://github.com/open-x4-epaper/community-sdk/pull/15)
needs to be merged first, we also need to add another commit to this
here PR, updating this dependency.
* I decided to hide this behind a default-OFF option. While I'm not
really concerned that this fix might potentially damage the display,
someone more knowledgeable on E-Ink technology could maybe have a look
at this.
* There's a binary attached in the linked issue, if someone has the
required sunlight to test this in-depth.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
- Allows back button to be held to escape boot loops when reader
activity crashes and device attempts to boot to previous state
- Reduces the need of removing SD card and access to another device to
delete the `/.crosspoint/state.bin`
* **What changes are included?**
- Back button can be held while booting to boot to home screen
- Update of User Guide section to include this feature
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
---------
Co-authored-by: Arthur Tazhitdinov <lisnake@gmail.com>
## Summary
### What is the goal of this PR?
- Visual UI overhaul
- UI theme selection
### What changes are included?
- Added a setting "UI Theme": Classic, Lyra
- The classic theme is the current Crosspoint theme
- The Lyra theme implements these mockups:
https://www.figma.com/design/UhxoV4DgUnfrDQgMPPTXog/Lyra-Theme?node-id=2003-7596&t=4CSOZqf0n9uQMxDt-0
by Discord users yagofarias, ruby and gan_shu
- New functions in GFXRenderer to render rounded rectangles, greyscale
fills (using dithering) and thick lines
- Basic UI components are factored into BaseTheme methods which can be
overridden by each additional theme. Methods that are not overridden
will fallback to BaseTheme behavior. This means any new
features/components in CrossPoint only need to be developed for the
"Classic" BaseTheme.
- Additional themes can easily be developed by the community using this
foundation
## Additional Context
- Only the Home, Library and main Settings screens have been implemented
so far, this will be extended to the transfer screens and chapter
selection screen later on, but we need to get the ball rolling somehow
:)
- Loading extra covers on the home screen in the Lyra theme takes a
little more time (about 2 seconds), I added a loading bar popup (reusing
the Indexing progress bar from the reader view, factored into a neat UI
component) but the popup adds ~400ms to the loading time.
- ~~Home screen thumbnails will need to be generated separately for each
theme, because they are displayed in different sizes. Because we're
using dithering, displaying a thumb with the wrong size causes the
picture to look janky or dark as it does on the screenshots above. No
worries this will be fixed in a future PR.~~ Thumbs are now generated
with a size parameter
- UI Icons will need to be implemented in a future PR.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
This is not a vibe coded PR. Copilot was used for autocompletion to save
time but I reviewed, understood and edited all generated code.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Fixing custom sleep behaviour where the first image in the /sleep
directory is not shown
* image at index 0 is not being rendered when more than 1 image is
stored in /sleep directory, because `APP_STATE.lastSleepImage` is always
0.
## Additional Context
* `APP_STATE.lastSleepImage` is reset to 0 when a epub is open, this
value is only used to compare it to the randomly selected one in
`renderCustomSleepScreen()` that should always be a valid index, since
the list of valid bmp images is colected from scratch. -> no need to
reset it and block image @ index 0 from being rendered
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
Co-authored-by: Oyster <Oyster@home>
## Summary
Extracted some changes from
https://github.com/crosspoint-reader/crosspoint-reader/pull/500 to make
reviewing easier
This PR adds HAL (Hardware Abstraction Layer) for display and GPIO
components, making it easier to write a stub or an emulated
implementation of the hardware.
SD card HAL will be added via another PR, because it's a bit more
tricky.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **NO**
## Summary
Fix https://github.com/crosspoint-reader/crosspoint-reader/issues/288
Based on my observation, it seems like the problem was that
`inputManager.isPressed(InputManager::BTN_POWER)` takes a bit of time
after waking up to report the correct value. I haven't tested this
behavior with a standalone ESP32C3, but if you know more about this,
feel free to comment.
However, if we just want short press, I think it's enough to check for
wake up source. If we plan to allow multiple buttons to wake up in the
future, may consider using ext1 / `esp_sleep_get_ext1_wakeup_status()`
to allow identify which pin triggered wake up.
Note that I'm not particularly experienced in esp32 developments, just
happen to have prior knowledge hacking esphome.
## Additional Context
N/A
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? NO
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Disables going to sleep after uploading new firmware
* Makes developer experience easier
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< NO >**_
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Jeremy Klein
